itz me again...so i put the springs in and i took a step back and looked at it i really dont see much of a change my car seemed lower b4 when i had oem springs.did i do something wrong or do a have to break em in?? also the left side looks higher then the right is this commen? let me know ill put up some pics if need to.......

 

It will take some time to break in. it should even out as well. what springs did you put on because when i put my stechs on i could tell a difference immediately but it could be different with different spring heights.

 

these must be the TRD ones...you'll notice a difference in about 2 weeks

 

cars tend to settle unevenly because there is more weight on once side than the other (driver, transmission)

now, i did trd struts and springs, and i didn't notice alot of drop in the front, the rear is extremly noticible, you should be able to see it in the rear for sure.

now i'm wondering if replacing struts are the same time as springs helps prevent uneven settling... cause i didn't have any unevenness with my drop.

 

well for right now i have Drop Zone suspension 1.9 inch front drop, 1.8 inch rear drop but by the spring i was thinking of goin S-tech or mayb even a full coilover suspension i just want a nice clean drop all around

 

I would suggest the S-techs. Thats what I have. I have 18's they dont tuck but there is no wheel gap. Looks great, takes a few weeks to settle. Definitely lower!