ok so i get my car all jacked up and i get the bushings off and the friggen endlink bolts wont come off... i know i need an open end wrench and some allen keys but oh yea i dont have allen keys. looks like im gonna have to get some

 

oh and does anyone know what size key the endlinks are?

 

6mm

 

If your talking about the rear sway bar there is no allen keys involved. If I remember correctly its either a 12mm or 14mm socket or open wrench. Ive install about 3 sway bars and never have I used a allen wrench

 

x2~6 mm allen key

 

u shouldnt need a allen key, a socket or an box wrench should work to get that off.

 

you definately need allen keys, the bolt on the endlink will keep spinning if you dont keep it in check with the allen key, a regular socket wont work... trust me i just tried

 

you're referring to the fronts right? then 6mm will do it. what are you doing anyways?

 

rears, im tryin to install my H&R rear sway bar

 

I didn't need an allen wrench when I installed my rear sway. weird.

 

i went to take the nut off and it just kept spinning now i know if i use an impact gun ill take that nut right off but i dont wanna break anything...

 

hex key tool ( 3/16)

 

target sells allen keys with multiple sizes on one device for like $5.

 

*heads over to target*

nah ill probly go to Home Depot after work tday

 

well i got the allen key, so ill do it tomorrow morning, i have to go to work now so its a no go now.