will i need spacers to help these from rubbing or should i be able to bolt and go?

 

hmm depends on your drop, it will sit more flush than your average +40-45 wheel but it really depends on the drop.

The rubbing should be minimal though regardless,

 

no drop...would like to do maybe some ksport coilovers in the future

 

Should not have any trouble unless you absolutely slam it.

 

even if you slam it, you wont have any problems with a 17x7 wheel unless teh offset falls under 20

 

ok cool thanks everyone

 

lol false!

I slammed my coils the other day and my wheel is literally sustaining my fender so you couldn't really SLAM it on +35 without some other mods

 

owell...not lookin to SLAM in topeka....our roads are $h!ty from the snow and ice in the winter

 

lol how are you gonna tell me im false?

i went all the way down on H&R coils with 25mm spacers on the stock wheels, and it was fine. very very minor rubbing

 

from what i understand either of you could be correct...it just depends what coilovers are on the car and what their MAX DROP is...i believe H&R's don't go as low as sum of the others

 

believe it or not, H&R goes very low. lower then Stechs, SSPs, HKS coil overs.

 

lol I DID THIS LAST WEEK

i didn't even slam it as low as it could go and my wheels were literally holding the entire weight of the car, you could just bounce the car a bit and feel the wheels hitting the upper part of the fender

x2 on the H&R though

 

idk i just remember not having a single clearance problem

 

i rub on 17x7+35 only when i turn though...

slammed on B&G's