Berggs tC2 Rear Window Visor
08-10-2011, 11:49 AM
#142
Senior Member
SL Member
Join Date: Dec 2010
Posts: 251
Lol. Same problem here. Kind of strange its doing this for so many. Maybe the visor slowly warps at that corner. If that's the case it will need to be something stronger than double sided tape to hold it down. Ill be heading to check the auto store for some sort of glue in the coming days.
08-10-2011, 03:01 PM
#143
DaYUUM/Scion Evolution
SL Member
Thread Starter
did u guys glue it all correctly and completely?
because i had the same thing happen to mine, but it was our own fault because we were skimpy on the glue and put most of it on the top and ended up neglecting the sides (we also rushed it because I was heading out to a car meet)
anyways, we just put more glue (well put the right amount we should have put in the first place) on it and as of right now (its been about 3 weeks since) everything is on real sturdy
because i had the same thing happen to mine, but it was our own fault because we were skimpy on the glue and put most of it on the top and ended up neglecting the sides (we also rushed it because I was heading out to a car meet)
anyways, we just put more glue (well put the right amount we should have put in the first place) on it and as of right now (its been about 3 weeks since) everything is on real sturdy
08-10-2011, 03:42 PM
#144
did u guys glue it all correctly and completely?
because i had the same thing happen to mine, but it was our own fault because we were skimpy on the glue and put most of it on the top and ended up neglecting the sides (we also rushed it because I was heading out to a car meet)
anyways, we just put more glue (well put the right amount we should have put in the first place) on it and as of right now (its been about 3 weeks since) everything is on real sturdy
because i had the same thing happen to mine, but it was our own fault because we were skimpy on the glue and put most of it on the top and ended up neglecting the sides (we also rushed it because I was heading out to a car meet)
anyways, we just put more glue (well put the right amount we should have put in the first place) on it and as of right now (its been about 3 weeks since) everything is on real sturdy
nail polish remover so the new glue would have a clean surface to adhere
to. Now don't get me wrong I'm in no way bashing this product I like it alot one of my favorite mods I just think I need stronger glue thats all
08-10-2011, 04:19 PM
#145
DaYUUM/Scion Evolution
SL Member
Thread Starter
^^ I have tried this 3x. I also used a razor to scrape off the old glue and
nail polish remover so the new glue would have a clean surface to adhere
to. Now don't get me wrong I'm in no way bashing this product I like it alot one of my favorite mods I just think I need stronger glue thats all
nail polish remover so the new glue would have a clean surface to adhere
to. Now don't get me wrong I'm in no way bashing this product I like it alot one of my favorite mods I just think I need stronger glue thats all
08-10-2011, 04:22 PM
#146
Senior Member
SL Member
Join Date: Mar 2011
Location: OC, CA
Posts: 1,037
^x2 but i think mine's worst. right side corner is lifted already. and left side is getting there... lolz
ima ask my dad to get some of their double sided tape and i'll buy some of the adhesive primer.
@kj- any update on the window visors?
ima ask my dad to get some of their double sided tape and i'll buy some of the adhesive primer.
@kj- any update on the window visors?
08-10-2011, 04:30 PM
#147
DaYUUM/Scion Evolution
SL Member
Thread Starter
well i can say the last time i saw him (the day we fixed my rear visor, 3 weeks ago)...he already measured my door frames the week before
he told him his ETA on when its ready was a month or so from then (he design it but has to send it out of the country to have it molded/produced since he has no contact for that in the US)
so my best guess is the prototype will be ready sometime between next week to the end of the month
(same ETA for CUSCO strut bar! 3rd fitting...hopefully it works this time. 3rd time is the charm
rossfingers: )
he told him his ETA on when its ready was a month or so from then (he design it but has to send it out of the country to have it molded/produced since he has no contact for that in the US)
so my best guess is the prototype will be ready sometime between next week to the end of the month
(same ETA for CUSCO strut bar! 3rd fitting...hopefully it works this time. 3rd time is the charm
rossfingers: )
08-10-2011, 07:27 PM
#151
Member
SL Member
Join Date: May 2011
Location: Pasadena, MD
Posts: 63
Gorilla Glue with a precision tip and a C clamp. Put a thin bead on the inside of the contact area. I had same problem on the trailing edge, drivers side. I think carwash bumped it too hard. Clamp it down for at least an hour.
08-11-2011, 08:30 AM
#157
Junior Member
Join Date: May 2011
Posts: 24
I thoroughly cleaned mine, put a lot of the adhesion promoter on the top and down the little sides and let it sit like it said. The top right corner is the only spot coming up. It sort of looks to me like the visor is a bit too big and laps over the window on each side a little. But since it laps over on the left side the same and hasn't come up, then I'm not sure thats the problem.
08-11-2011, 02:20 PM
#158
Senior Member
SL Member
Join Date: Dec 2009
Posts: 494
How dare you insult the Pontiac!
08-11-2011, 02:26 PM
#159
Senior Member
SL Member
Join Date: Dec 2010
Posts: 251
haha.
To each their own I suppose but it hasn't hit the rice mark yet on my meter. A few dragon/tribal decals, a fake BOV, fart-can exhaust, and a giant pedestal spoiler... then I will consider myself rice-i-fied.
08-11-2011, 11:30 PM
#160
Senior Member
SL Member
Join Date: Jun 2011
Location: Houston, TX
Posts: 752
My page is jacked, its showing all comments as posted today.
Anyway, Kidjustin, have you heard anything new about the side window visors?
For the 2nd time, my car got rained in, do to my insistance in cracking the windows during the day. 99 degrees by 9 am and not a cloud in the sky, pouring cats and dogs by 10:30.....uhg
I want vent visors!
Anyway, Kidjustin, have you heard anything new about the side window visors?
For the 2nd time, my car got rained in, do to my insistance in cracking the windows during the day. 99 degrees by 9 am and not a cloud in the sky, pouring cats and dogs by 10:30.....uhg
I want vent visors!