hey guys so after the storm my check engine light came on after i dug out the car, its throwing 2 codes P0138 and P0607 cleared them and about 5min later it came back on throwing the same codes, tried to clear again a little later and the CEL went away for 30sec and came back on

any ideas what to do?

I have
Cold air intake
Tsudo Cat Back
NST Crank Pulley

never had this issue before, we just recently had a storm here in NY so the whole car was buried

 

0138 is an o2 sensor problem id take it in for warrenty if you still have it
0604 is an programming issue in the pcm/ecm

 

have you tried driving it?

regardless i'd take it into the dealer, i cant imagine any of the mods listed would cause any of those lights, but thats what dealers love to see if aftermarket ____ to blame ____ on, so IMO before you do take it in i'd swap the intake back to stock

 

yeah ive been driving it for 2 days with the CEL on and it drives perfectly, im gonna put the stock intake on it when i go in this week

 

wow sorry for late reply forgot about this, turned out to just be the bad o2 sensor caused all the codes to be thrown