Strait Pipe?
Has anyone strait piped there tc? i found one on youtube and it sounded nasty but i dont know how well it actually sounds in person?
http://www.youtube.com/watch?v=au4A1...feature=relmfu
http://www.youtube.com/watch?v=au4A1...feature=relmfu
Thats actually my tc lol
This is the same but only outside of my garage with no "echo". IF your looking for deep I def agree with cement the new ark sounds so dope its by far my favorite. On mine we did a 2 and a quarter from cats back so yea it DOES still have the cat. I like the way it sounds personally, it may be for some more than others I suppose depends just what your really looking to get out of it as far as tone. I will take another video later this evening and post it so hopefully you can get a more clear tone out of it, at least closer to in person rather than from in a garage or under the tip haha
Mightyp Or aztcrs should have the diff exhaust tone vids we made one night between my straight pipe, mightys descendant, and aztcrs' TRD. Not sure if it is in a thead but im sure if you PM them they can guide you in the direction of the vids.
I had OEM headers in my tC1 and gutted the Second Cat myself. Had some shop weld it back on. Louder exhaust (not bad nasty), and I imagine more free flow.
I did notice a stronger exhaust smell when I pulled into the garage at home tho.
I have to "car sit" a family members car next week so I may use that as an opportunity to transport my exhaust pipe so I can gut it again. Even with my CAI and TRD Exhaust the car is not that loud, its quite pleasant.
Last edited by StatuSCheckA; Aug 10, 2012 at 08:52 PM. Reason: *typo
Mine never threw a cel at all, it should be fairly simple especially if you can/have access to weld. I just took mine to my muffler shop i been going to for years and he did it. All in all it should cost you more like worst case scenario imo and dont quote me....maybe like 80bucks MAX to have it done.
When you are refering to car exahust the word Nasty can men many many things, can you be more specific about your opinion. Sounded good or bad nasty. Thanks.
I had OEM headers in my tC1 and gutted the Second Cat myself. Had some shop weld it back on. Louder exhaust (not bad nasty), and I imagine more free flow.
I did notice a stronger exhaust smell when I pulled into the garage at home tho.
I have to "car sit" a family members car next week so I may use that as an opportunity to transport my exhaust pipe so I can gut it again. Even with my CAI and TRD Exhaust the car is not that loud, its quite pleasant.
I had OEM headers in my tC1 and gutted the Second Cat myself. Had some shop weld it back on. Louder exhaust (not bad nasty), and I imagine more free flow.
I did notice a stronger exhaust smell when I pulled into the garage at home tho.
I have to "car sit" a family members car next week so I may use that as an opportunity to transport my exhaust pipe so I can gut it again. Even with my CAI and TRD Exhaust the car is not that loud, its quite pleasant.
It goes O2 Sensor, Cat, then down pipe, O2 Sensor then Cat. So if you gut or strait pipe the second cat your Second O2 sensor will never know.
I asume you plan on straight pipping the resonator too? I did not. Only the Second Cat.
If you do any cutting by yourself keep it neat so when it gets re-welded no one gets suspicious if they are inspecting your car.
*Watching this Thread now*
You found a shop that will do this? Lol my Local muffler shop gave me the whole "I can loose my license speech". He was even kind of a redneck that knew I was willing to spend money. All well, he played by the books, good for him.
I had to take my own exhaust off, cut off the cat, gut it. Then took the cat and exhaust pipe to yet another shop to weld it and tell them it was for a Off-Road Vehicle.
I had to take my own exhaust off, cut off the cat, gut it. Then took the cat and exhaust pipe to yet another shop to weld it and tell them it was for a Off-Road Vehicle.
Someone correct me if i'm wrong about the tC2. I only been under it once.
It goes O2 Sensor, Cat, then down pipe, O2 Sensor then Cat. So if you gut or strait pipe the second cat your Second O2 sensor will never know.
I asume you plan on straight pipping the resonator too? I did not. Only the Second Cat.
If you do any cutting by yourself keep it neat so when it gets re-welded no one gets suspicious if they are inspecting your car.
*Watching this Thread now*
It goes O2 Sensor, Cat, then down pipe, O2 Sensor then Cat. So if you gut or strait pipe the second cat your Second O2 sensor will never know.
I asume you plan on straight pipping the resonator too? I did not. Only the Second Cat.
If you do any cutting by yourself keep it neat so when it gets re-welded no one gets suspicious if they are inspecting your car.
*Watching this Thread now*
Not exactly sure #noobstyle. I do know that he had removed everything from cat back and yes I am pretty sure there were two res or a sec cat like you said hate to sound dumb about it?? I remember when we lifted it even he was like "wth" haha Agreed with cutting and everything for sure, That does make sense though about the sensor....maybe thats why it didnt throw a cel due to the one cat being left
You found a shop that will do this? Lol my Local muffler shop gave me the whole "I can loose my license speech". He was even kind of a redneck that knew I was willing to spend money. All well, he played by the books, good for him.
I had to take my own exhaust off, cut off the cat, gut it. Then took the cat and exhaust pipe to yet another shop to weld it and tell them it was for a Off-Road Vehicle.
I had to take my own exhaust off, cut off the cat, gut it. Then took the cat and exhaust pipe to yet another shop to weld it and tell them it was for a Off-Road Vehicle.
HAHA yea I did, hes an older redneckish guy also, called apache muffler here in phx its been here for YRS! Oh geez you had to jump through some hoops on that one, yea i was in and out in less that half an hr, then leaving got ticketed by photo radar cuz I was trying to get my revs up there to herre the new tone! haha #dumb move
HAHA yea I did, hes an older redneckish guy also, called apache muffler here in phx its been here for YRS! Oh geez you had to jump through some hoops on that one, yea i was in and out in less that half an hr, then leaving got ticketed by photo radar cuz I was trying to get my revs up there to herre the new tone! haha #dumb move
Also a few posts back, what do yo mean by snorkel thing? You mean the part of the stock intake box that sucks in air?
Last edited by StatuSCheckA; Aug 10, 2012 at 09:07 PM. Reason: Anecdote





