MCH5 aka KidJustin's tC2 | why I can't update the first page... :(
#303
DaYUUM/Scion Evolution
SL Member
Thread Starter
i was thinking of e-mailing them, but i will ask around my sponsors and other connections if anyone is close with ED for some more direct info. will update asap
#306
DaYUUM/Scion Evolution
SL Member
Thread Starter
more info on the FR-S
http://www.tune86.com/ft-86-content/...technical-data
oh and the BRZ
http://automotivediscovery.com/subar...r-pic/9211018/
http://www.tune86.com/ft-86-content/...technical-data
oh and the BRZ
http://automotivediscovery.com/subar...r-pic/9211018/
#307
#308
DaYUUM/Scion Evolution
SL Member
Thread Starter
^^ i just went direct and e-mailed them..but nothing yet
i was going to meet with one of my sponsors who might know someone this weekend...but things came up and it got pushed to next weekend. i am still check my sources, maybe 2 weeks and i'll know something (or know that i dont know enough people to get in touch with ED)
i was going to meet with one of my sponsors who might know someone this weekend...but things came up and it got pushed to next weekend. i am still check my sources, maybe 2 weeks and i'll know something (or know that i dont know enough people to get in touch with ED)
#309
DaYUUM/Scion Evolution
SL Member
Thread Starter
Lighting Update 11-12-11 - LED DRLs
first i just wanted to say thanks to Druidiron and MightyP for all their help and their own DIY guides and tests
they are from superbrightleds and i followed the guide here: https://www.scionlife.com/forums/sho...d.php?t=204760
I have a switch...but i dont like it so i just made it continuous for now until i get a better switch
i did it MightyP style by doubling up the LEDS...but with my own little twist...
so here is how it turned out!
=====
Sticker Update....i had some extra time so i thought id change up my sticker lineup again to add in some more Scion Evolution support
they are from superbrightleds and i followed the guide here: https://www.scionlife.com/forums/sho...d.php?t=204760
I have a switch...but i dont like it so i just made it continuous for now until i get a better switch
i did it MightyP style by doubling up the LEDS...but with my own little twist...
so here is how it turned out!
=====
Sticker Update....i had some extra time so i thought id change up my sticker lineup again to add in some more Scion Evolution support
Last edited by KidJustin; 10-15-2013 at 02:27 AM.
#311
#312
DaYUUM/Scion Evolution
SL Member
Thread Starter
haha thanks!
well in person it looks more like separate LEDs (like dots)...kind of like the first photo. the other photos made it look solid i think because of the flash. i'll take more photos later
anyways...i dont feel like a DIY, but basically this is what i did to make it look like that...
i bought two of these: http://www.superbrightleds.com/cgi-b...cs%2FSWFLS.htm
really long right? well this is where MightyP's help came in....
i measured how long i needed for the headlight, then DOUBLED it...THEN cut the extra..which was only a little
then i took out about half of the clear plastic cover....folded the exposed LED strip and reinserted back into the renaming clear plastic cover (VERY HARD AND TIME CONSUMING!..also had to be careful not to mess up any of the LEDs on the strip)
then from there i put double stick tape on the modified LED strip then tucked it under the headlight
======
i bought a switch, but it doesnt fit and i dont want to mod the dash. i want to use the OEM fog light switch for these. does anyone have one i can buy? to know where can buy? or maybe if the dealership people can help me out with the part number so i can search for the exact part online?
well in person it looks more like separate LEDs (like dots)...kind of like the first photo. the other photos made it look solid i think because of the flash. i'll take more photos later
anyways...i dont feel like a DIY, but basically this is what i did to make it look like that...
i bought two of these: http://www.superbrightleds.com/cgi-b...cs%2FSWFLS.htm
really long right? well this is where MightyP's help came in....
i measured how long i needed for the headlight, then DOUBLED it...THEN cut the extra..which was only a little
then i took out about half of the clear plastic cover....folded the exposed LED strip and reinserted back into the renaming clear plastic cover (VERY HARD AND TIME CONSUMING!..also had to be careful not to mess up any of the LEDs on the strip)
then from there i put double stick tape on the modified LED strip then tucked it under the headlight
======
i bought a switch, but it doesnt fit and i dont want to mod the dash. i want to use the OEM fog light switch for these. does anyone have one i can buy? to know where can buy? or maybe if the dealership people can help me out with the part number so i can search for the exact part online?
#313
DaYUUM/Scion Evolution
SL Member
Thread Starter
Lighting Update 11-13-11 - Audi Style LED DRLs - Day pictures
I thought I would just throw up some day pictures for you guys...
and with the lights off...
and up close
and with the lights off...
and up close
Last edited by KidJustin; 01-10-2012 at 07:05 AM.
#317
DaYUUM/Scion Evolution
SL Member
Thread Starter
Audio Upgrade 11-19-11 - OEM Audio+ Reference 400CF
I finally got the OEM Audio+ Reference 400CF ordered and installed in my tC2. and I LOVE IT! If anyone remembers the numbers OEM Audio+ threads that have been created then you can understand why I am not going to write a review on the system. The facts are that I love it and I think its the best system out there, well worth the price. this is the FIRST OEM Audio+ Reference 400CF installed with an aftermarket radio.
But I can review the DIY part of the install...
they did record the install to document the process from the side of a customer DIY, so in addition to install it...i had some interview questions..very exciting! the install took about 2hours and 30minutes...not bad
there are a lot of steps as far as removing panels and such, but nothing too hard. especially with our lego cars...haha...just sometimes it felt like i was almost going to break it. removing everything is completely necessary to make the install very clean....keeping the nice stock look.
the most complex part was probably drilling out the old rivets of the 6x9 speakers and riveting in the new ones. it was my first time doing that...but not very hard at all. other than that there was the process of getting the wire through the firewall. if anyone has done the Audi light DIY...there is a better (and safer) way to get through! there is basically an area in the grommet that needs to be cut on the engine side and then there is already a hole on the inside. check out their manual to see what i am talking about...i will be redoing my Audi lights as soon as i have a chance. Also I found out the speakers OEM Audio+ uses are manufactured from the same company that makes the speakers for McLarens
any more questions feel free to let me know. or drop some Qs on their FB page. http://www.facebook.com/oemaudioplus
here are some good photos from the install
and some more behind the scenes photos from the video they shot...
http://www.facebook.com/media/set/?s...5107364&type=1
But I can review the DIY part of the install...
they did record the install to document the process from the side of a customer DIY, so in addition to install it...i had some interview questions..very exciting! the install took about 2hours and 30minutes...not bad
there are a lot of steps as far as removing panels and such, but nothing too hard. especially with our lego cars...haha...just sometimes it felt like i was almost going to break it. removing everything is completely necessary to make the install very clean....keeping the nice stock look.
the most complex part was probably drilling out the old rivets of the 6x9 speakers and riveting in the new ones. it was my first time doing that...but not very hard at all. other than that there was the process of getting the wire through the firewall. if anyone has done the Audi light DIY...there is a better (and safer) way to get through! there is basically an area in the grommet that needs to be cut on the engine side and then there is already a hole on the inside. check out their manual to see what i am talking about...i will be redoing my Audi lights as soon as i have a chance. Also I found out the speakers OEM Audio+ uses are manufactured from the same company that makes the speakers for McLarens
any more questions feel free to let me know. or drop some Qs on their FB page. http://www.facebook.com/oemaudioplus
here are some good photos from the install
and some more behind the scenes photos from the video they shot...
http://www.facebook.com/media/set/?s...5107364&type=1
Last edited by KidJustin; 01-10-2012 at 07:17 AM.
#319
DaYUUM/Scion Evolution
SL Member
Thread Starter
john, you just gotta save up like i did. its completely worth it!
also...
when the installed was complete and the video taping was basically done...the mail came and guess what arrived...
white plasti dip...try an guess for what
and..Nathan at IMPORTequipment came through with the Scion letters for the emblems! So if the weather is good...I will work on my emblems tomorrow and test out the letters. if it all works out, they will go on sale ASAP and you guys can finally get that clean custom emblem look and not worry about painting!
also...
when the installed was complete and the video taping was basically done...the mail came and guess what arrived...
white plasti dip...try an guess for what
and..Nathan at IMPORTequipment came through with the Scion letters for the emblems! So if the weather is good...I will work on my emblems tomorrow and test out the letters. if it all works out, they will go on sale ASAP and you guys can finally get that clean custom emblem look and not worry about painting!