johndeo11

that is clean... great job.. looks good!

xtimxmayyx

nice tC man! and build looking good for a start. one REALLY curious question though. How did you install footwells? Ive been trying to look into that for a while now and I havent found any helpful information to doing this. I want to install blue footwell into my tC.

Kyleptrsn1

I decided to loosen in the wrong direction when I was loosening the lugnuts...

xtimxmayyx as for the Led foot wells, I went to www.ledunderbody.com and ordered the basic 2 piece starter kit along with an add-a-circuit. I tapped into the fuse under the driver side that deals with the tail lights. Rand the wires to under the center dash and snaked the lights out from there. It was actually a really easy process. Only reason it took me a while is because I wanted to completely hide the wires (They give you like 10 feet of wire! WAYYY too much). I can take pictures if you want me too, just let me know.

xtimxmayyx

yea, in another thread i actually read about the starter kit and I was all ready to buy one. The only problem is Im not completely sure how to install it cause im not really an electrical guy, but if you can just show me some pics and make a really short DIY or step by step of how to do it, that would be great! thanks!

xtimxmayyx

and you mentioned something about tapping to the taillights? I wanna tap add a circuit into the headlights so whenever I turn on the headlights, these will go on.

Kyleptrsn1

Well the fuse I went to is the tail light fuse that causes the tail lights to be on when the head lights are turned on. There isn't a "head light" fuse so to say. This is the closest we've got. But no worries, the lights are only on when the head lights are on. I'll post a DIY sometime today. But don't worry I was scared too. (I hate working with car electronics)


Edit: The DIY for the L.E.D.s foot well lights is up in the ICE and interior section.

ProjectTC2

iTrader: (1)

Actually there are 4 headlight fuses in the engine compartment fuse box. They're the 4 on the very top left. All 10A

Kyleptrsn1

Oh man! I'm giddy!!! HUGE update will coming in the next few weeks!!!

tanyatc2

Hi and congrats in your new ride , im trading in my tc next month so i have a set of goodies if you or anyone is interested i have a set of clazzios leather black grey stiching 390$ they are new i used them like only for a little less than a month i also have a set of eibach sports springs 1 yr used 150$ and a injen air intake 8 months used 150$ and also a set of leather cover for the shift box and a leather cover with foam for the box where you rest your right arm 60$ for both anyone interested contact me salrod666@hotmail.com

Kyleptrsn1

So yeah this is a small update but I finally got my sub hooked up in my car. I had it in my '07 but have just been to lazy to install it. I forgot how much I missed having bass in my car.

scionSS

nice build thread going on.

Kyleptrsn1

So I will hopefully get new orders soon! GA or Cali! I don't care which as long as its one of the two! Oh and I have a huge update coming in the next two weeks.

Kyleptrsn1

So I've been splurging a lot on my car lately. Here is my first up date. A pioneer 4400BH head unit installed by some really good guys in Winder, Ga. They were awesome enough to get the usb and mic hooked up like stock. He couldn't get the aux input to work but I'm okay with that because I have never used it.

r2dnel

Can you still use your steering wheel controls?

Kyleptrsn1

Yes sir. That was my stipulation. I wanted steering wheel controls and usb control. I got both.

SuBSiN

Very nice setup so far. I have the same car. Black tc. I was looking into painting my calipers also, but never done that before. Did you take them off the rotors when u painted them? Or just tape around everything and just do it on the car? The color I have only came in "high heat metal paint". Says can be used on valve covers, heat shields, etc. Do you think this will work for calipers also? Or should I stick with caliper paint

Sent from my HTC EVO 3D X515m using Tapatalk 2

r2dnel

Awesome! I hope that can be done with harnesses/included wiring. I'm looking to do this myself and dont want to cut/solder anything.

Great setup man!

Kyleptrsn1

I already posted this on the Dezod thread but yup, its in and I'm loving it.

808_TC2

whaaaaaaaat? are you gonna be running it on the quarter?

Kyleptrsn1

Well its my daily driver and need to finish breaking it in first but my goal is to run it at least once. I will definitely post times when that happens