whats the fuel pump that goes with the 2zz's? (how much lph...)

and yes, injecters and tuning are well worth it (lots of tuning..)
but when you're done with that....why not....

 

There is an aftermarket company that makes injectors for our engines, BUT part of the head needs to be machine for them to properly fit. I'll call my buddy to find out the company.

 

we can use stock toyota parts... the injectors from the 2zz motor are bigger than our stock ones....

 

Seems like you're the only one the read my write up months and months ago...

Did you do this as well?

 

i did read your write up..(thanks again)
i have the set of injectors ready to go, but have not dropped them in yet...

i know, i know...i should have done it while i had the rail off...but i didn't have time to tune it....
i was going to a meet in 12 hours and needed to finish the clutch/pulley....

i am tring to set up something (will pm you about it, i don't know how much info you can share with me)

 

This is a great topic, mind if I bring it back to life? :D

 

so did perrin adam ever post a pic anywhere other than this thread? without the purge built in whether it can help with boosted motors or not i would want it.

 

it's like seeing an old friend again. thanks.

 

no pic from adam. after getting an earful about how my problem could not happen. he was going to post a pic of his set up.
only to find out he has a pre-production piece. different line going to the rail.

i still think this is a good part. just poor QC on perrins behalf. (again...the pulley was the first mishap)

 

yeah i dunno if i'd trust them. i do need a pulley though and theirs is basically the only one out there.

 

i trust these products now.

might have some hesitations about any new products...need to have someone else test it out....

 

I would buy from them. :D

 

Dave (Mr. Featured Ride of the Month),

I'm glad you do, cuz I still don't.

 

it must be my hard core modding roots. i will buy things and make them work...
if you expect something perfect, they would not be my first recomendation.....

and thanks for the FROTM...i'm just following in the footsteps of those before me...
they left some big shoes to fill....

 

Yeah, I know. I wouldn't be seen in the same show as you. You make my xB look stock!

 

stock huu??

 

So funny how just one minor piece of aluminum would cause a few people not to trust them. The problem is minor, infact I just helped a Norcal member(Shelby) install a fuel rail/Pulley with no problems what so ever. Thank you so much for the write up dgHotLava, in fact I loved the product so much that PrecisionMuffler.com will now have them available on our website. All Perrin products are now available in Norcal for purchase and installation. :D Thank you Perrin for a product thats matched to none.

 

Thanks to the info provided by dgHotLava we now have a larger fuel injector configuration that will work perfectly with this quality product. It will also be available for sale on PrecisionMuffler.com very soon. :D