JustinsbB

I'm in the middle of installing a blitz kit on my 2006 xb,5 speed,and I can't figure out the ecu wiring because the pinout they give you in the instructions is for a 2003-2005 and a 2006 is different.So should I just tap into the wires that are in the same numbered spot it is telling me to,or try to find the color of the wire it wants me to tap into in another colored location?Also how did you guys get the a/c line to not get hit by the alternator pulley?

JustinsbB

57 views and no one's offered any input?Come on guys,help a fellow xb owner out!

hip_2b_sqr

Not sure about the ecu wiring. You do need to get a longer AC line made.

JustinsbB

Actually I fixed the a/c issue.Cost me 2 bucks.A 1/2 inch conduit strap and two metal screwes.It's about a inch,maybe a little less now from the pulley.And it has a little give it too so that it'll flex with the motor.I'll upload pictures later.Still need help on the wiring though.Called blitz and their technical guy isn't in til tomorrow.

blown_xa

go to a Toyota service desk and request them to print out the ecu diagram for you in color. Thats what I did back in the day.

JustinsbB

Well I got the wiring down except one pesky wire.The light green wire on the Blitz fuel controller.It's not in the instructions anywhere.

JCBOX

hi do u ever figured where that cable connects to? i need help on that cable too. thanks

edwin05xb

so i just picked up a blitz supercharger kit from a friend for my xb but i was just wondering do i need to do anything else to my car like bigger injectors,fuel rail... just need to know the heads up anything at all... ty

JCBOX

well since is a bolt on u dont really need anything, unless u really want to do it. hey can u figure out where does the light green cable goes connected. thanks