If you run the same boost in a manual and an auto... the manual will always have more WHP... this is because you lose power in the auto's transmission. But you can always build the engine, do a tranny upgrade and turn the boost up to get more WHP than a manny. Im not sure what ZPI's final plans are when it comes to the differnces between production kits. Im guessing the manual kits will run at 7.5 psi and the auto's at 6psi, until you upgrade certain items, but at 6psi it is a blast to drive.

 

that sounds good, I think that the 6psi would be awesome to drive. too bad I don't have money for it at the moment or I would be on it.

 

does the auto kit come with a transcooler,what kind of boost controller comes with the kit,and when will the xa kit come out

 

As far as I know... No, No and soon..

ZPI has a trans cooler in the works...but they also have a lot of other things keeping them busy at the moment..so if you can not wait for theres, then you can buy a trans cooler for around $60- $70 at an autoparts store.. If you would like the model number of the one I got let me know and I will post up the model number.

No boost controller comes with the kit.. You can order one seperatley from ZPI if you desire one.

 

ok so which transcooler do you have

 

B&M Super Cooler # 70255

 

ok thanks

 

hey billy are you running 7.5 psi like the manual kit or do you have to run lower boost

 

I am running 6 PSI at the moment, ZPI had it at 7.5 psi for awhile, with no issues..but they wanted to make sure that all would be safe (tranny)...so we went back down to 6 psi.. I am hoping in the near future to boost it back to 7.5 psi and do a retune... and after that a few more things and turn it up some more.

 

dude, im tuning mine for 7.5 psi on the stock clutch... then ill just keep it outta boost for a couple days till i get the clutch installed... hope everythiing will hold

 

Crazy kids.....

 

yes sir... think it will last....

 

I dunno Peter.. I find it hard not to be in boost cause it's so much fun.. but if a couple of days is 2 days and your are light on it..then you might just make it.. But I wish you the best luck with staying out of boost and not showing off..

Back on Topic...... ZPI turbo's... and get yourself one... If you have the need.. the need for speed in your box.. then this is the kit for you..

 

yes back on topic.... i highly recommend you get a zpi turbo kit... they are a blast to drive....

 

Then where the heck do i remember a T3 from!?

 

We had billys auto xB at 10psi for awhile with no issues. We lowered the boost to insure extended tranny life. I am confident that the auto can handle 7.5psi for a long time I am not however confident to say how long that time is. We lowered the boost a little to insure long reliability.

We build these kits for bolt on options. If you want to turn the boost up that is always your option.

 

but if since i run my car only on the weekends and even then not alot would it be safe in that case to run 7.5 or 8 psi

 

drive that thing down here and let us put a prototype kit on your car

 

watch

 

There you go TRDXA06.. it dosent get much better than that... take the hookup..