avic-d3 issue with vid while driving - please help!!!!
Anyhoo.... I grounded out the parking brake to the basic radio ground wire.
This worked fine the first 2 days but today it decides to shut off the screen when i actual move and come back on while I am not driving.
What can I do?
This worked fine the first 2 days but today it decides to shut off the screen when i actual move and come back on while I am not driving.
What can I do?
KnoxBox gave some good info in this thread -> https://www.scionlife.com/forums/viewtopic.php?t=169260
Not sure if that applies to your HU but it might help. Hope you get it working.
Not sure if that applies to your HU but it might help. Hope you get it working.
i heard every model after the avic-n2 were going to have some kind of mechanism that stops you from getting around the parking break thing. im not sure if that were true, but it sounds to me that it may be..
i pressed the reset button on the front and it is working again while i drive.
hopefully it stays working, but if thats the worst i have to do every few days then bring it. they also added a speedo pulse.... but i didnt hook that up either
hopefully it stays working, but if thats the worst i have to do every few days then bring it. they also added a speedo pulse.... but i didnt hook that up either
ok...
first off, pioneer spent a lot of time and money to keep people from bypassing the screen. There is an actual gyro (is that how you spell it?) built into the brain which can sense movement, hence turning the screen off. There are ways around this...
illnist, check your PM's...
first off, pioneer spent a lot of time and money to keep people from bypassing the screen. There is an actual gyro (is that how you spell it?) built into the brain which can sense movement, hence turning the screen off. There are ways around this...
illnist, check your PM's...
i have this unit also and i also am having problems with this feature i think all it is is the nav is sensing the movement because with the parking break wire direct apped into the radio's ground you get to warnings everytime you turn the unit on and when you stop you have all your features even if your in gear its just the speed sensor wire sensing the movement i don't know how it would work out to just disconnect the speed wire i haven't tried it cause i don care that much about having the video i've had 6 different units of this sort: cda-1004 alpine, iva-d900 alpine, deh-p7800dvd pioneer, iva-w200 alpine, iva-d310 alpine,and now this one i've grown out of the video part but it would be nice not to get the messages.
wierd. my clarion instruction booklet has in little print on some random page stating that in order to watch video while driving, ground the wiere for parking brake. i got a good laugh outta that one.
Originally Posted by Malibu_Rapper
This is easy, just go here: http://www.avic411.com/forum/viewtopic.php?t=4670
so far with just grounded brake wire i am still running after rest.
when i hook up my wii i will add the mute wire aswell.
Thread
Thread Starter
Forum
Replies
Last Post
evolving_machine
Scion tC 2G Drivetrain & Power
17
Oct 21, 2023 01:16 PM
awdmofo
Scion tC 1G Owners Lounge
44
Feb 8, 2016 05:58 AM
cid_mcdp
Maintenance & Car Care
4
Jan 5, 2015 02:45 PM
TheTripleC
PPC: Vehicles
1
Jan 4, 2015 06:46 PM








