Fitted gauges
#21
Originally Posted by xbox83
hey thanks a lot your links are very helpful...i just needed a visual basically i guess you just used a compass and ruler to get the circles and for the spacing or did someone else make that and you just used it as like a stensel(sp?)
I had that cardboard template in my toolbox for months. I think I threw it away a few days ago ...
Remember to take out the combination meter (speedo/tach) and move the wiring harness out of the way *before* you start. The tech section has instructions under "Gauge Lighting (xB)" but they leave out one detail -- there's a fastener clip right above where the idiot lights are that has to be removed with an offset Phillips screwdriver.
Feel free to PM me if you have any ???s.
#23
ok cause i was thinking about getting the autometer 2-1/16" gauges and mounting them in that area....now is that 2" hole saw that you used work for that since the gauges are a ____ hair bigger.
Thread
Thread Starter
Forum
Replies
Last Post
my06tc
PPC: Engine / Drivetrain
10
06-25-2015 12:18 AM
mattjk
Scion xA/xB 1st-Gen ICE & Interior
121
12-22-2004 10:49 AM