I am trying to install a apexi rev/speed meter right now, where do I tap into for the tach? Thank you.

Steve

 

black wire at the obd connector should work... test with a multimeter if you have one...

 

dont have a multimeter, but there are two black wires on the connector.

 

the one furthest right

 

I dont know what is up with the thing, that is the one I tapped into and for some reason it shows the rpm in the speed area of the read out. It has a seperate g box thing so I dont see how they could be getting mixed up. Anyone have any ideas?


Steve

 

its pin number nine..black wire..
that should be the correct wire.

 

Ditto