Question about stock radio
#1
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Apr 2005
Location: Dundalk, Maryland
Posts: 606
Question about stock radio
Proably a stupid question,But is the plug on the back of the radio a toyota configuration or Pioneer?
I just picked up a DEH-P8400MP but dont have a power cord for it and Pioneer wants better than $40 for the cord.
Before I pull the dash apart does anybody know if it will plup right in?
Thanks,Scott
I just picked up a DEH-P8400MP but dont have a power cord for it and Pioneer wants better than $40 for the cord.
Before I pull the dash apart does anybody know if it will plup right in?
Thanks,Scott
#2
No it is a toyota harness, only one radio will pop right in with those factory plugs and it is an Eclipse double-din navigation unit. But metra makes the harness for us, model # 70-1761, normaly runs between $15-$18.
#3
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Apr 2005
Location: Dundalk, Maryland
Posts: 606
Thats what I figured,I ordered a adapter kit with wiring to plug into the factory wiring, Now I need the harness for the radio.
Anybody know where I can get one cheap?I only paid $50 for the radio.
Scott
Anybody know where I can get one cheap?I only paid $50 for the radio.
Scott
#6
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Apr 2005
Location: Dundalk, Maryland
Posts: 606
Well I went to Circuit City today they dont carry one that fits,Its a little to big so I will check the audio shop near me.
But thanks for the option.
Scott
But thanks for the option.
Scott
#7
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Apr 2005
Location: Dundalk, Maryland
Posts: 606
Ok I took back the harness and they dont know where to get one,My next question is does anybody know what the pinout of this radio is? Pioneer DEH-P8400MP
so I can just solder the wiring harness to the pins.
Scott
so I can just solder the wiring harness to the pins.
Scott
#8
Before you go through all that did you try calling Pioneer, to see if they can send you the harness for it. You would have to wait a little for it, but would save you some headaches trying to solder on to the pins, i wish i had one at work because i would send it to you. Good luck man.
#10
Yikes $40 thats quite a bit of money for a harness, the ebay one sounds like the better choice and i hope it fits for you too. Let me know if it works if it dosent i'll see what i can do for ya.
#11
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Apr 2005
Location: Dundalk, Maryland
Posts: 606
Thanks this is what I have comming.
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
And this
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT
so I hope the radio works,I got the radio,A Alpine V12 MRD-M300 amp and a JVC crossover for $50.Someone owed some money.We'll leave it at that.
Scott
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
And this
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT
so I hope the radio works,I got the radio,A Alpine V12 MRD-M300 amp and a JVC crossover for $50.Someone owed some money.We'll leave it at that.
Scott
Thread
Thread Starter
Forum
Replies
Last Post
clickclickw00t
PPC: Interior / Electronics
2
02-18-2015 08:57 PM