Hey all,

Im about to install my Fusion components and I am just curious to what everyone else has done with their components. So let me see some pics so I can get some ideas, thanks all!!!

 

Here is a link to pics of what is done in my car
http://www.sounddomain.com/ride/2176135

 

I have Kicker KS 6.2 Components..
I mounted the crossovers on the doors for the front speakers.
I have 3 little leds above them with a switch on each door.

 

 

I installed the tweeter IN the door, pointed at me.. much better than drilling a giant hole in my door, and sounds just as good. Ask anyone whos been in there.

They are diamond Audio HEX 6 1/2

 

in the door... as in out of sight.... but not earshot.... interesting...

 

DOes it muffle the sound at all?

 

so this might be a dumb Q, but for "Matts_xB", why is there a switch by the crossover?

do the LED serve a real purpose?

 

No pics of it, but I have Orion Pro 6.2s with the tweet flush-mounted in the door panel, similar to Nasty's setup. I gutted the inside of the door panel and built a fiberglass mount for the 6 that angles it upward rather than presenting the stage to my knees. From the exterior, the door panel looks stock, with the exception of the tweeter. Upon closer investigation, the angle of the 6 is apparent within the door panel.
My tweets are angled up and forward, toward the windshield. This creates a more realisticly-staged stereo image.
My original intention was to glass a set of kickpanels similar to my last car, but the angle of seating, mixed with the fact that my xB is manual, made me decide otherwise.