Airbag Wiring help
#1
Airbag Wiring help
First off I do have a TC and I know this is the Xb fourm but I know you XB's bagged your ride all the time. Im having trouble with adding compressor 2 relay. I am just making sure I am doing it right and wont blow up anything lol.
In pic number one for the single compressor this was already pre-wired
#30 on relay goes to battery or a power source
#86 goes to my ECU "I think is +12)
#87 goes to compressor
#85 goes to ECU "I think is ground) NOW
Now In pic two to add compressor #2 THIS is where I am lost
It shows #30 on both relays now run to the compressor IS THAT RIGHT???
And shows #87 is now "+12v battery or a power source" for both relays IS THAT RIGHT????
I think #85 is the same just jumped over
and #86 on relay 1 stays the same
Just having trouble with wiring the compressor and battery
In pic number one for the single compressor this was already pre-wired
#30 on relay goes to battery or a power source
#86 goes to my ECU "I think is +12)
#87 goes to compressor
#85 goes to ECU "I think is ground) NOW
Now In pic two to add compressor #2 THIS is where I am lost
It shows #30 on both relays now run to the compressor IS THAT RIGHT???
And shows #87 is now "+12v battery or a power source" for both relays IS THAT RIGHT????
I think #85 is the same just jumped over
and #86 on relay 1 stays the same
Just having trouble with wiring the compressor and battery
Last edited by michaelgonzo3id; 06-17-2012 at 05:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
pjl52
Scion xA/xB 1st-Gen ICE & Interior
2
08-13-2015 02:38 PM
Wrencher
Scion xB 1st-Gen Owners Lounge
1
07-29-2015 01:38 PM