The Be All End All Tanabe df210 Springs Thread!(pics too)
#361
I can't compare my spring and shocks to TRD's. I am running the 210's with echo struts and the stock rear struts. Compared to a stock xB I thought it was so much better. The only problem is I wish I could bring the rear down to match the front height. Its a great drop.
Here's a question that I hadn't thought about before. I have beem considering the Echo struts for my box in order to gain (lose?) the 1/2" drop. My box had TRD springs, shocks, and struts installed when it was new. Does any one know how these THREE compare? In other words I could ask how the Echo struts compare to the TRD's that the dealer put on.
#364
Does anyone know if xB springs are taller than the xA? The xB has greater drop than the xA, but if xB spring are taller then this is irrelevant. However, if it is the same height, I would get the xB DF210s over the xA.
#367
What offset and tires for 16x7's do i need to get to get more flush with outside not sticking out but like 1/2 inch from side of fender with my DF210s on or my other option wheel i liked only came in 17" x 7.5 42mm offset? spacer..shims?
#368
i'm running 16x7 with +40 offset. the fronts have a 5mm wheel spacer just to clear the calipers and sits near flush right inside the fender. i used to have an 25mm (1 inch) hub spacers in the rear but would rub a little bit of the tire side wall with back passengers when going over dips etc due to the bounce, which is why i took it off. 20-25mm spacers should be fine since DF210s only give a 1.8 inch drop for the rears.
#369
i'm running 16x7 with +40 offset. the fronts have a 5mm wheel spacer just to clear the calipers and sits near flush right inside the fender. i used to have an 25mm (1 inch) hub spacers in the rear but would rub a little bit of the tire side wall with back passengers when going over dips etc due to the bounce, which is why i took it off. 20-25mm spacers should be fine since DF210s only give a 1.8 inch drop for the rears.
#372
Anyone go with those cheap ebay springs for 50 bucks?
I have a well worn 2006 xb and for some reason, it looks like a 4x4. This is my 9th xb, and I just bought it so have no history on it. I want to get it down some, but it really isn't worth spending like 250 for springs. The car is probably worth 2500 and is my winter beater.
I have a well worn 2006 xb and for some reason, it looks like a 4x4. This is my 9th xb, and I just bought it so have no history on it. I want to get it down some, but it really isn't worth spending like 250 for springs. The car is probably worth 2500 and is my winter beater.
#374
FS: NIB Tanabe DF210's
**NOTE: Can a Mod move this to the correct Forum, can't post in classified - Tnx
**************************************************
Hello,
Since my xB was totaled I have a few items I would like to get rid of:
Tanabe DF210's 'New In Box" (never got to install them) for $200 shipped or $175 local pickup.
Custom fit Car cover for Gen 1 xB (used only a few times) for $85 shipped or $75 local pickup.
**Shipped to lower 48 or local pickup S Bay Area (Silicon Valley, CA)
PayPal accepted, PM if interested
**************************************************
Hello,
Since my xB was totaled I have a few items I would like to get rid of:
Tanabe DF210's 'New In Box" (never got to install them) for $200 shipped or $175 local pickup.
Custom fit Car cover for Gen 1 xB (used only a few times) for $85 shipped or $75 local pickup.
**Shipped to lower 48 or local pickup S Bay Area (Silicon Valley, CA)
PayPal accepted, PM if interested
#375
does anyone have pics of a gen2 on dr210's with 19" rims? Are there any issues with the 19" rim? I have been advised twice now to go to an 18" but want to keep my 19s. Any advise/pics would be appreciated.
I have an RS8 currently on TRD springs and want to go lower
I have an RS8 currently on TRD springs and want to go lower
Thread
Thread Starter
Forum
Replies
Last Post
kleecker
Scion xB 2nd-Gen Suspension & Handling
3
01-09-2015 02:26 PM
fluxingnation
Scion xB 1st-Gen Owners Lounge
1
12-26-2014 04:28 PM
bBOXD
Scion xA/xB 1st-Gen Suspension & Handling
28
12-07-2003 07:08 PM
Besk_one
Scion xA/xB 1st-Gen Suspension & Handling
4
10-16-2003 07:45 PM