Goldlines and steelies (until next week) on RS 2.0
#1
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Jun 2004
Location: Elizabethtown, PA
Posts: 206
Goldlines and steelies (until next week) on RS 2.0
Here are a few shots of my Goldlines that I installed today. Took about 2 hours not including the time it took to remove a top strut nut that stripped (what a pain).
I know the wheels are ghetto, but I'm waiting for my 17"s Axis Reverbs that will be here and put on next week.
The drop doesn't seem very noticeable in the pics, but in person you can definitely tell a difference. And now I can't get it in my driveway without hitting the exhaust after it sat for a few hours.
http://www.totallyboardz.com/scionlow.htm
I know the wheels are ghetto, but I'm waiting for my 17"s Axis Reverbs that will be here and put on next week.
The drop doesn't seem very noticeable in the pics, but in person you can definitely tell a difference. And now I can't get it in my driveway without hitting the exhaust after it sat for a few hours.
http://www.totallyboardz.com/scionlow.htm
#5
I have the same dragging problem on my driveway. I've found backing in at an angled approach so the driver's rear corner comes in first seems to be the best angle to get up with out scraping lip or exhaust. If I need to go into the garage forward, I will come almost parallel to the curb and then turn sharply up it.
Drop looks good.
Drop looks good.
#7
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Jun 2004
Location: Elizabethtown, PA
Posts: 206
The box sank even more today. You can definitely tell it is dropped now.
Got my reverbs from a local wheel/tire place. Everything including tax, lugs, mount, balance, and even bolted onto the xb will be around $1064 out the door. They did a better deal than anyone I could find online and guarantee everything if I have a problem (not a warranty, but will help with any issues).
Hopefully the wheels show up this week. Gonna dynamat and add all of my stereo/video/lighting stuff next week too. I have headrest monitors, headunit, custom box w/ 2 12" subs and amp rack, and tons of cathodes all waiting to get hooked up.
Got my reverbs from a local wheel/tire place. Everything including tax, lugs, mount, balance, and even bolted onto the xb will be around $1064 out the door. They did a better deal than anyone I could find online and guarantee everything if I have a problem (not a warranty, but will help with any issues).
Hopefully the wheels show up this week. Gonna dynamat and add all of my stereo/video/lighting stuff next week too. I have headrest monitors, headunit, custom box w/ 2 12" subs and amp rack, and tons of cathodes all waiting to get hooked up.
#9
Senior Member
Strictly Scionized
SL Member
Thread Starter
Join Date: Jun 2004
Location: Elizabethtown, PA
Posts: 206
Here is a link to a set from the same guy I get them from on eBay.
http://cgi.ebay.com/ebaymotors/ws/eB...category=33710
There was a thread about these on scionlife and some people didn't like that the guy had negative feedback, however my transaction went well. The guy selling the stuff even said he has an xB.
Here is the other post about cheap projectors.
https://www.scionlife.com/forums/vie...=698999#698999
http://cgi.ebay.com/ebaymotors/ws/eB...category=33710
There was a thread about these on scionlife and some people didn't like that the guy had negative feedback, however my transaction went well. The guy selling the stuff even said he has an xB.
Here is the other post about cheap projectors.
https://www.scionlife.com/forums/vie...=698999#698999
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
07-28-2021 10:32 PM