Here you go sir. http://scionevolution.org/home/index...d=127&Itemid=1

Its all custom work so nothing is or will be produced. Scion Evolution built the car with help from many great manufacturers and shops, like mine, Island MotorSports haha.

 

If you could get a Jeep guy to stop laughing I bet you could get one custom made pretty cheap and it would be funtional not just purty. I had a full cage custom made and put in my CJ5 for $250.

 

Pretty much any race fab shop can make a roll cage for you. They do not have to be purchased as a kit. You can have one made with your choice of finishes and metals, with Chromoly being the most expensive. It does, however, weigh considerably less than your standard steel tubing. Even using chromoly, expect to add several hundred pounds to your box.
Also, a true roll cage is NEVER bolt-on. The whole point of a roll cage is to be one solid piece. This can only be done properly by welding the thing to the frame. Hence, the name X-point roll cage where X is replaced with the number of times the cage is welded at the frame rails.

 

several hundred pounds? wow that must be a whole lot of bars. like reinforcing everything possible and then some. i'm gonna guess that pretty much no one on here needs a 50+ bar setup , lol