medicinaljim

i recently picked up some racing hart cr wheels on ebay,(18"x7.5" 42 offset).seller said they would fit my xb and the back of the rim has 4x100 stamped into it,along with a few other patterns.they dont fit!i was thinking of buying wheel adapters to make them fit.will i have any problems with a 1" adapter running 215/35r18 tires?xb has not been lowered.

EMU

really....thats sucks..dang ebay sellers..you did try all the holes though rite? i know a company that makes the adapters..just cant think of it rite now..ill let you know

Digidizzle

wow, if 4x100 is stamped on the back of the rim, it should fit. don't give up, keep trying!

Metro273

This is exactly why I HATE aftermarket wheels, they might not fit!...
I'll just buy the Toyota 18" TRD wheels, they look "bad-a$$" and fit too...

hayalex6

it should fit if it says 4x100. There are probably tons of holes drilled in it, just keep on rotating one by one and try and get it to fit.

hayalex6

btw, you know the 18" 'TRD' wheels are made by RacingHeart right?


TRD products are just rebadged aftermarket items.

Metro273

^^^Yes I know that, I use the "search" button alot, thanks...

hayalex6

sry, just letting people know.

not knockin the wheels at all, they're really nice looking. I love seeing the indentations color matched to the car.

YELOSUB

My Konig's have 8 holes and you have to keep turning it before it finally hits the right bolt pattern...As people are saying, don't give up...Keep turning the rim slowly checking each location until it finally slips on...Good luck

medicinaljim

i will try again,but need to know if i can run the wheel adapters if i have to.

YELOSUB

Not sure about the wheel adapters but if the rim is stamped 4x100 I would assume it would fit...I was frustrated when I first tried to put on my Konigs because they didn't just slide right on the first lift...I had to rotate and keep trying the different bolt patterns...

medicinaljim

i have heard that it is possible R.H. may ship wheels that are not predrilled.my wheels have 8 holes,but have at least six different 4/5 lug patterns stamped in the wheel.i believe my wheels came off a 5 lug civic,but also fit a 4 lug pattern. but not 4x100.it is times like this i really miss my old air cooled vdubs.

myzer

where do you get wheel adapters from?

hotbox05

5 lug civic?

Persocon

uniform 8 holers are like 4x100 and 4x114.3
weird looking ones like pictured below are like 4x100/5x100 or 4x114.3/5x114.3

bB2NER

AMEN Brother. Best looking wheel for the xB hands down!!!!
We should start an xB on TRD wheel club.

myzer

adapters really snap off easy?

bB2NER

not if you use them correctly.

myzer

how do you use them correctly? haha