i should be recieveing this hood sometime this week and im wondering where do i put the windsheild washer things since the hood doesnt have the holes? Thanks

 

Remove the nozzles from your original hood. Measure the placement of the originals very carefully. Make a paper tracing if you have to. Drill holes in the cf hood in the exact same place, shape and size as the original and install nozzles.

Reason: the micro-jets are positioned exactly for your windshield and wipers. It can be a real pain to adjust them. Often you end up making the nozzle hole too big and the fluid sputters out instead of sprays evenly.

If you are planning on selling your old hood with nozzles, go to the junk yard or dealer and buy replacements and put back in your original hood.

 

OR You can leave them off ... I have the Audio Formz fiberglass hood and I just left them off ... I think the hood would look at claner with them off ... Its up to you ... I never really used mine ...

 

I left mine off. Looks a lot cleaner..

 

I use them all the time. Especially now during lovebug season. Don't know how you can live without them.

 

Ayup, gotta luv dem bugs!

 

Evildave installed his on the plastic base where the wipers are and they work fine. :D

 

Buy some aftermarket squirters and mount them on the trim piece that houses the wiper motor/lower windshield trim. Or, go old school style and mount some squirters on the wiper arms themselves, near the wiper blades.

 

I left them off