DIY: Cleared corners on sonar's.

Reply Subscribe

Thread Tools

Search this Thread

May 28, 2007 | 07:51 AM

BurxBox

Thread Starter

Senior Member

SL Member

Joined: Feb 2007

Posts: 633

DIY: Cleared corners on sonar's.

I made a Diy on this Kind of. You get the point I guess.
check it at http://www.clubxb.com/forums/f16/102...rs/#post155183

Have any ?'s just ask.

May 28, 2007 | 02:22 PM

NCBOX

Senior Member

SL Member

Joined: Mar 2006

Posts: 267

From: Wilmington, NC

Nice but how is the reflection? I am glad I got mine before they went to amber.

May 28, 2007 | 05:45 PM

BurxBox

Thread Starter

Senior Member

SL Member

Joined: Feb 2007

Posts: 633

It still lights up bright with the silvestar bulbs. and matches the dull silver that is behind the bulb.

May 29, 2007 | 09:26 PM

Blacklisted

Senior Member

SL Member

Joined: Jun 2006

Posts: 232

From: Glendale, AZ

what parts of the headlight did you remove before putting it in the oven?

May 30, 2007 | 03:36 AM

BurxBox

Thread Starter

Senior Member

SL Member

Joined: Feb 2007

Posts: 633

Just the turn bulbs, the highbeam bulbs, and the plug for the projector.

I went with 225 for 7-10 min.

and used a butter knife to help get lense off.

Jun 1, 2007 | 10:20 PM

Blacklisted

Senior Member

SL Member

Joined: Jun 2006

Posts: 232

From: Glendale, AZ

did mine today but i used spray paint instead of tin foil.
i was having the hardest time keeping the foil from getting wrinkled.

thanks for the write up!

Jun 2, 2007 | 07:05 AM

BurxBox

Thread Starter

Senior Member

SL Member

Joined: Feb 2007

Posts: 633

Your welcome. The foil was tuff to keep smooth.

I should thank you. You were the inspiration for my fog light vents/cold air intake vents.
I also did a DIY on how I did mine.

THANKS AGAIN