Here is a plug and play type HID projector made to fit cars that use H4 type headlight bulbs.

I say plug and play because it is made to fit into the headlight without any cutting or drilling.

Note: You still need to bake your headlight to remove the lens in order to install the projector.

I will actually be selling these specific set for $400 shipped w/ the HID bulbs and ballast, will need custom wiring to make the Bi-xenon hibeams work properly.

Total install time - 2hr from start to finish

All stock


Stock headlight beam


Projector and HID bulb/ballast laid out


Headlights removed and into oven


Bake for a few minutes at 250degree Fahrenheit


New projectors installed and ready to go


Slightly blue color due to 35watt ballast with 6000k bulbs.

 

is that the kit from the retrofitsource? i got the same if it is, and it works pretty good, it seems like the output is lower then stock, but im not sure since i haven't had stock ones for like two years or so.