Your the man!!! Thank you very much This is greatly appreciated....

 

you could drill in top the to side. that's what i did with before i cut into my lip. it's alittle harder to mount but it's less noticeable. so if you ever decide to take it off there won't be screw holes to be notice. that's a choice. and also who says you have to buy the grille either go junk yard or take it off a box of your rival that you don't like. it my sound dick headed but that is what i did. plus i know that it's a rip off. 40 bucks for only one grille. they crazy.


---------tom

 

done

 

quick question......

the lights come with a small bag with screws...what are they for?

its been so long that I bought the lights that I've misplaced that little bag

thanks guys

 

screws in little bag are for mounting the switch panel/assemble (optional)

 

Those are good pictures.

 

I picked up a pair of 3 inch round driving lights before i found this fourm. Anyone try or see 3 inch round ones in the same spot? What do u think of the round ones?

 

The only problem you may have aesthetically is that you are removing a rectangular piece of the grill and replacing with a round fog. This may result in an odd amount of space between the fog, grill, and surrounding bumper. Mainly it depends on your own taste and how good you feel it looks. Good luck


Here are a couple of variations to this fog light mod, not exactly what you have, but this may show you how easy it can be to change it up a bit:

 

Interesting foglights.

 

Are these light bulbs interchangable? I have a blue and green bit going I want to stay consistant with

 

i think im about to do this mod cuzz i lost the two grill inserts some how

 

Yeah, they just take standard H3 bulbs. I switched mine out right away with Luminics.

 

Here is an idea for you. There is a small hole in the top of the assembly, I placed a Green LED 194 bulb thru the hole. So now when the fogs are off I can flip the switch and light up the fogs green. It matches the LEDs in my headlights

 

Tinted, APC dual beam fog's..

 

Hot! That is what I am doing with my oem fog lights and my walmart grill ones!

 

alrighty i got my blazer lights from walmart installed and everything looks great......i bolted it down through the bumper and not on the lip because i didnt want to put a hole through da lip and what not.......did through the top just incase i wanted to take em off ppl wouldnt see da wholes i put in my bumper........but yea i was to lazy to find a drill so i just used an old knife i found in the shop and it worked fine for me........ill post up flix as soon as i can........now all i need are some yellow bulbs.......

 

I better go find these. Is walmart the best place to buy them?

 

later on that night after the install on the way home from work..........i hit a big tire that was in da middle of the hwy that was left behind by a truck and now my lip and fogs are no more........along with other messed up body parts.........but yea hope this helps those who asked for better flix but never got to see em and hopefully will give tall a clue on how to do the mod........i would do a right up but im not in the best of moods........

 

my whole setup didnt even last 3 whole days.......including the k-style lip and fog lights...........money up in flames there..........

 

anyone willing to offer to send these to me...I'll pay of course the price and shipping...