Does anyone make a skid plate for the xB I bottum out and scrape on most everything and would like a little more protection under there.

 

I already have a dent in my trans pan and the little braces behinde the front tire are looking kind of bad.
I will gat a few pics today to show how low it sits and maybe of the damage.

 

I've never heard of one for an xB but i would be interested too.

 

c-one makes one for the xA (ist)

http://www.c-one.co.jp/C-ONEPARTS/under_panel.html

don't know if it can be modified
just know that it will p1ss off your oil change guy.......

 

I will get some pics when it quits raining.

I have to change my own oil b/c it is so low that the cra won't fit over the gaurd rails or go on a lift. So it would only ____ me off.

 

You could do like what we used to do our 4X4 's for rock crawling. Get a plastic 55 gal drum, saws-all a rectangle out of the drum & bolt it to the bottom of the xB. Large nylon cutting boards work well also. Do what ever is cheapest. If you weld 4 nuts to the bottom side & drill a thru hole for the bolt, you will have a good spot to put on & take the skid plate without stripping the threaded holes you put in.

This is only a suggestion. You mess up your ride it is your own fault. I take no responsablities for you mistakes.

Good luck

 

here are a few pics of some of the damage.