i have a kenwood ddx6019. I was wondering if there was any way to get the controls on my steering wheel to control it??????? any one have any info on something that would work

 

Crutchfield's lists some options http://www.crutchfield.com/cgi-bin/p...wheel+controls . I bought a unit to do this when I installed the DDX-6019 in my 06 xB. It used a line of sight signal to the HU's remote sensor. Mounting adapter unit and particularly mounting its transmitter in a good spot to be seen by the HU, I decided, was more trouble than the steering wheel controls were worth.

 

http://www.pac-audio.com/swi-compati...acture=kenwood

http://www.pac-audio.com/products/pr...el%20Interface
scroll down to the PAC JACK. choose kenwood. then you'll see it will work with your kenwood 6019

I hooked one up to my Pioneer & another guy hooked one up tp his clarion.. the work great!!!!..... good luck... jh

 

how hard is it to hook up???

 

https://www.scionlife.com/forums/viewtopic.php?t=195979

Not too bad... the instructions are all on their website for Toyota9Scion) vehicles..

read thru this thread a few times.. you can do it!!! good luck.. jh