Notices
Scion xB 2nd-Gen ICE & Interior In-car entertainment and electronics...

Interior lights for AC controls

Thread Tools
 
Search this Thread
 
Old Sep 12, 2010 | 01:46 AM
  #1  
oreoremix42's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2008
Posts: 1,219
From: Dillsburg, PA
Default Interior lights for AC controls

My lights are out in my ac controls. The position light and the temperature light is off. They have never been on actually and I never thought anything of it until now and saw someone on here who had his lights on. How do I get them back on?
Old Sep 12, 2010 | 01:35 PM
  #2  
45SSxb2's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
iTrader: (1)
 
Joined: Feb 2010
Posts: 195
Default

are the lights on the dash on still?, and did u ever that the A/C controls out?
Old Sep 12, 2010 | 08:10 PM
  #3  
oreoremix42's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2008
Posts: 1,219
From: Dillsburg, PA
Default

I had them out recently but they have been out since I have owned the car. All teh dash lights are still on!
Old Sep 13, 2010 | 01:29 PM
  #4  
oreoremix42's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2008
Posts: 1,219
From: Dillsburg, PA
Default

Anyone?
Old Sep 14, 2010 | 06:04 AM
  #5  
vanndaddy's Avatar
Junior Member
 
Joined: Nov 2009
Posts: 14
From: Bridgeview, Il
Default

Pull the controls back out and double check everything. Why were the controls removed in the first place? If you replaced the bulbs with led's, they may be backwards (bulbs will go both ways, led's only go one way).
Old Sep 19, 2010 | 07:19 PM
  #6  
oreoremix42's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2008
Posts: 1,219
From: Dillsburg, PA
Default

They were removed to paint the piece. Theyve been out since ive owned it
Old Sep 22, 2010 | 05:51 AM
  #7  
xseveredveganx's Avatar
Senior Member
10 Year Member
5 Year Member
Utah Scions
SL Member
 
Joined: Aug 2007
Posts: 4,139
From: City of Salt, Utah
Default

May actually have to be physically plugged in... Sounds dumb, but it's possible. Each **** has a wiring harness that it attaches to.
That's the only thing I can think of. May even pull the bulbs themselves out and test them for continuity with a digital multimeter.
Old Sep 22, 2010 | 01:42 PM
  #8  
oreoremix42's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2008
Posts: 1,219
From: Dillsburg, PA
Default

Yea they were attached for sure. Cuz I double checked them.

I may need to get new bulbs I think
Old Sep 27, 2010 | 08:50 PM
  #9  
oreoremix42's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2008
Posts: 1,219
From: Dillsburg, PA
Default

Bump
Old Oct 5, 2010 | 09:51 PM
  #10  
Slody4Futbol's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2008
Posts: 339
From: Clinton, MS
Default

Originally Posted by oreoremix42
Bump
O_o not trying to be rude but it's been 16 days, you could either

A) Order new bulbs, they'll get to you within 7 days and you can have all new bulbs

B) Swap the good bulb with the bad bulb. If the good bulb works in the bad bulbs old location, then you know it was the bulb that was bad. If the same controls stay lit after you have swapped bulbs then you know you have an issue with the wiring or the contacts where the bulbs lock into.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
clickclickw00t
PPC: Interior / Electronics
2
Feb 18, 2015 08:57 PM
757_BRDFLY
Scion tC 2G Owners Lounge
0
Jan 9, 2015 12:29 PM
tC6M
Introduction Forum
2
Nov 26, 2014 06:44 PM
Besk_one
Scion xA/xB 1st-Gen ICE & Interior
6
Nov 17, 2003 09:28 PM
sithscripter
Scion xA/xB 1st-Gen ICE & Interior
9
Sep 26, 2003 05:27 AM




All times are GMT. The time now is 06:27 AM.