Ok instead of making multiple threads just gonna do this here. any input at ALL would be great.
All products coming from www.oznium.com
PB-Piranha bar


heres a rundown and im trying to be thorough here i already bugged Focal damn near to death with all this. I'm a bored semi-broke college student who wants to be able to do it himself. i have no real car lighting knowledge. I've done soldering on my own dash and some simple install stuff but nothing involving fuses or wiring, hiding wires, w/e. SO please any help is great.

Main Focus

Grill Lighting
R8 Light (see below)
Foot Wells light
Top of Trunk Light
Switches

Is all this possible? and can i do this my own?

Simple visual version of what I'm asking

When i click Unlock Car on my keychain- Dome, Grill, Footwheels i want to come on.

Need to have R8 lights turn on with parking lights (the 1st click when you turn the lights on. 2nd click turns on mains.)

Need to be able to turn on grill and footwells at will for showing off purposes. i would like to keep indoor lighing seperate from outdoor. so maybe two switches. and hopefully i can add on to these later.


BELOW is the orginal post it still stands. So here is what i KNOW
i want to use.

2 10" BLue PB bars in foot wheels (add 2 for the rears later)
2 10" Cool White For the upper and lower grill (or) one for grill one for engine bay (its filthy though)

For R8 mod- 5 leds per siding. 8 White 2 Blue. One blue in the middle on each vent.

I don't know how to tap into a fuse box. looking at the linear line extenders, this battery>fuse tapper thing Focal showed me. and maybe an add a fuse connector? And some spare fuses. i got electrical tape. The below is the orginal post. skip over most of it. the pic is in there but yea.

Also if someone knows how i can get access to my grill on my scion that would be dope as well. I looked at it today like wtf??

THANK you to all that wish to help me.



https://www.scionlife.com/forums/vie...950&highlight=

ok so i think the pics are down but the the TS's avatar is the finished product. Basically i want to be able to do it. i will have the dough and time next week. so i wanna get it done. but i have never EVER messed around with wiring. all the led things i have done have been plug ins. or a decent amount of soldering but already provided leads n grounds. so i dont know how ot wire the leds from that side panel to wherever it is that they would get power from. i would also run them to a seperate switch. so that if i want to add more lighting stuff i can run it to that switch rather than having everything snap on with the DRLs. Can any one help me out here? maybe with a video or if ur in upstate ny i'd gladly drive a lil ways to meet.

Thanks

 

bump for edit.