Hey everyone, buying a strup header and cel eliminator with it from someone off their ride, and was wondering if anyone knew a site that has the instructions, or if someone could PLEASE scan them if they have them?

any help would be appreciated!

 

step 1) unbolt stock manifold
step 2) bolt new manifold

step 3)optional* sit back and drink a beer.

its pretty straight forward man there should only be 5 bolts connected to the head then 2 to the block then 2 to the s-pipe. doesnt get easier.

 

The only troubles I ran into were with 2 bracket things in the middle. but yeah, pretty straight forward.

 

HA! So true.

 

Check my ebay thread, there are pictures of the header installed.

 

Is pretty straight forward, take off the stock peice like 5 bolts connected to the block, 2 on the bracket, and 2 spring loaded bolts that connect it to the s pipe. Take off O2 sensor.

Scre the O2 sensor into the strup header.

put in strup header and rebolt everything back on. you wont be reusing that middle bracket.

For the Cel Eliminator, unscrew the O2 sensor from the s pipe screw the eliminator on, screw the O2 on. People have gotten it on without taking off the s pipe but i found it easier to just take it off.

Make sure you also get that spacer for the dip stick tube or it might hit the header.

 

I had the prototype, just take the OEM off and put the new one on. pretty easy..

for cell elliminator easier to just take the pipe off to put it on.