For all who are still looking for aftermarket springs, there is yet another manufacturer for you guys. They're out now @ Ptuning for around 225. Advertised Drop: 1.6F/2.2R, Progressive. B+G is popular in Europe so they're reputable.

 

Here is a picture of our springs installed

 

Not bad,
all it need is couple subs in the trunk to lower it half an inch.
then it will be prefect.

 

B & G Suspension are you guys going to make coilovers for the xb2.
The drop on those springs looks good.

 

There are talks about making the coilovers.. If we did what rates would you guys like to see.?

 

Well most people are gonna go for low spring rates, just like EVERY other coilover. I've always been hoping for coilovers that had spring rates of 10 kg/mm+ on the front and the rear and ones that were valved correctly. (the balance of spring rate can be decided by you guys), but we know that one person won't determine that.

 

For our Coilovers.. We were thinking about maybe a 7kg / 6kg or 8kg / 6 kg what do you guys think?

 

heres a pic of the actual springs.. encase anyone was interested.

 

COILOVERS??? maybe in the near future???

 

We are considering making our RS2 coilover kit for the New xB.. I posted spring rates above that we are thinking about using on the coilover kits.

 

saweet!

 

bump for coilovers +1

7/6 ftw