just tried to install one on my 2010 XD and it seems that the MAF is a little too large to fit in the intake ???

 

no one has one of these on their 2010??????????????????????

 

I installed it on my 08. Did you get the black one? I did, but I had to get a dremel and sand off the paint on the interior of the hole. It was still a tight fit, but with some petroleum jelly it worked in for a good fit. I figured with the heavy coat of paint that it was the problem and thought the polished one would not be. Be careful not to crack seat of the gasket on the maf like I did. Just take your time.

 

i did mine today, but i got the polished one, and everything went together fine, although before i put the front bumper back on it looked like it might not fit, but in the end everything is alright, and i'm very happy with my intake.

i have the 08 xD, but i'm pretty certain that we have the same parts as far as the air flow sensor.

 

thanks, I have the black one too and ended up doing the same thing to make the MAF fit, had to cut a little off the end of the tube to give the filter a little clearance from the bumpe too