speedometer and tach no longer rise and fall upon starting
I took my car in for an oil change. When I got the car back the speedometer and tachometer no longer rise and fall when I start the car. I assume they hit the wrong button when turning the oil change signal off. I could take it back to the dealer but I don't feel like making the trip. Does anybody know how to turn it back on....I looked in the manual and couldn't find it.
Thanks
Thanks
I don't know specifically how its done on the xD, but if it's the same as the tC then try this: http://home.cfl.rr.com/icdedppl/faq.html#c9
Follow the same instructions except for the part about "trip A or trip B" you want it on the ODO. I discovered this when the dealer didn't reset my oil light.
to reset the oil change light it has to be on "trip A."
to reset the oil change light it has to be on "trip A."
https://www.scionlife.com/forums/viewtopic.php?t=205308
1. ODO selected on the multi function display
2. Turn key to OFF position
3. Hold down button while turning it to ON position.
4. ODO SHOULD go to zero and back to actual mileage after 5 seconds.
1. ODO selected on the multi function display
2. Turn key to OFF position
3. Hold down button while turning it to ON position.
4. ODO SHOULD go to zero and back to actual mileage after 5 seconds.
Thread
Thread Starter
Forum
Replies
Last Post
mw1957
Scion xA/xB 1st-Gen Drivetrain & Power
4
Mar 16, 2015 06:00 PM
cid_mcdp
Maintenance & Car Care
4
Jan 5, 2015 02:45 PM






