HELP!!! Turn Signals are not working!!
Thread Starter
Senior Member
SL Member
Joined: Oct 2007
Posts: 2,461
From: Portland, Oregon
HELP!!! Turn Signals are not working!!
So all of a sudden my Turn Signals aren't working!! When I push my left, right and the hazard lights, it wont turn on! And when I unlock the car with my keys,
the signals don't flash like it use to either. Does anyone know where i can locate the fuse? I'm guessing its a fuse problem
help me!!!! >_<
__________________
the signals don't flash like it use to either. Does anyone know where i can locate the fuse? I'm guessing its a fuse problem
help me!!!! >_<__________________
Last edited by MR_LUV; Apr 15, 2020 at 10:32 PM. Reason: Awarded 10 Yr Badge
Senior Member
SL Member
Joined: Sep 2006
Posts: 11,141
From: Maryland
OWNER'S MANUAL!
open the hood, there is a box on the driver side fender that says "relays and fuses" pop it open, under the lid is a list of which fuse is for what, as well as some spare fuses, and a fuse grabber.
open the hood, there is a box on the driver side fender that says "relays and fuses" pop it open, under the lid is a list of which fuse is for what, as well as some spare fuses, and a fuse grabber.
Thread Starter
Senior Member
SL Member
Joined: Oct 2007
Posts: 2,461
From: Portland, Oregon
i was right! found it!! omg AND THEY HAVE SPARE FUSES THAT THEY GAVE ME FOR FREE!!! its like they knew this was going to happen... thanks drax!! *looks where drax is from* ill buy u a drink when u come =P
Junior Member
Joined: Apr 2020
Posts: 1
This happened to me, my blinkers and hazards quit working. I checked the fuses and they were all good.
I also replaced the Turn Signal Relay part on my tC. Still makes this clicking/buzzing noise when I put on my turn signals or hazards.
Also doesn't show up on my dash that my turn signals or hazards are working. All of my taillights, headlights, gauge lights, radio all still work and function.
Any suggestions on what it could be?
___
I also replaced the Turn Signal Relay part on my tC. Still makes this clicking/buzzing noise when I put on my turn signals or hazards.
Also doesn't show up on my dash that my turn signals or hazards are working. All of my taillights, headlights, gauge lights, radio all still work and function.
Any suggestions on what it could be?
___
Last edited by MR_LUV; Apr 15, 2020 at 10:29 PM.
Junior Member
SL Member
Joined: Feb 2021
Posts: 13
Same problem.
Did you find a solution my 2005 Scion xA is doing the same thing?
This happened to me, my blinkers and hazards quit working. I checked the fuses and they were all good.
I also replaced the Turn Signal Relay part on my tC. Still makes this clicking/buzzing noise when I put on my turn signals or hazards.
Also doesn't show up on my dash that my turn signals or hazards are working. All of my taillights, headlights, gauge lights, radio all still work and function.
Any suggestions on what it could be?
___
I also replaced the Turn Signal Relay part on my tC. Still makes this clicking/buzzing noise when I put on my turn signals or hazards.
Also doesn't show up on my dash that my turn signals or hazards are working. All of my taillights, headlights, gauge lights, radio all still work and function.
Any suggestions on what it could be?
___
Last edited by MR_LUV; Feb 24, 2021 at 02:12 AM.
Moderator
SL Member
Moderator
Moderator
Joined: Sep 2016
Posts: 759
From: Mesa, AZ
two separate tests needed to determine where problem lies:
1. pull bulbs and directly apply power from jumper cables attached to battery. This bypasses all switches and wiring. Do bulbs light up?
2. measure for voltage at bulb sockets when turn-signals activated. Do you have power at sockets?
1. pull bulbs and directly apply power from jumper cables attached to battery. This bypasses all switches and wiring. Do bulbs light up?
2. measure for voltage at bulb sockets when turn-signals activated. Do you have power at sockets?
Thread
Thread Starter
Forum
Replies
Last Post
sensez
Scion xA/xB 1st-Gen ICE & Interior
3
Nov 8, 2006 06:01 PM
