ok heres the deal..... i have someone that wants to buy my factory rims..... IF..... i can find a way to remove the "scion" or replace the cap or whatever i can to get "scion" off of the middle of the rims, any ideas anyone?

 

paint over it.

 

Order center caps from Enkei for the RS1.0 tC...it actually just has the Enkei logo and is the same size. Pop the old ones out and put the new ones in. I know most centercaps dont cost more then like 6 bucks a piece for ones like that.

 

um...... im not very good at painting and wouldnt know where to start, is it possible to somehow pull it off ? it seems like the scion logo on the front and back but alot thinner


trying to spend as little as possible to do this, wouldnt they charge me out the azz for new caps?

 

The center caps come off, so just remove them. I'm sure some other stock center caps will fit, but you might need to try a couple different ones.

 

um.... how do i remove them? and i dont have any spare caps lying around, so where can i find some to try?

 

hhhhheeelllpppp mmmmeeeeee

 

Remove the wheel then push the cap out from behind. They're just held in with springy plastic tabs. Whoever is buying the wheels wouldn't really need caps, or he can check with a dealer parts department or loacl wheel shop and see what he can find.

 

Go to a vinyl shop and have them make a vinyl centercap overlay. You could even have them do it with a logo of his choice or the logo for his car.

-Z

 

one of my damn middle scion caps came off, the little springy things broken an all. This happened when I took it to walmart for rotation and the guys said it just poped off when they were removing the tire. Walmarts fault or whatever...i'm thinking about just removing all of them to be CAPLESS.

 

good deal, thanks to all for help