how much toe does these alleviate? and how many degrees of neg camber?

 

Don't know about camber shims but they make spacers to help bring the rear track out to match the front.

 

don't know about the toe, but they are 3 degrees negative IIRC.

 

3 degrees is correct. toe shouldnt be changed....

 

If I understand correctly they just correct the toe. It goes back to the whole "when you lower your xB with this type of suspension it creates incorrect toe in the rear" thing. This is just supposed to make it correct and not wear your tires as bad.

 

how much toe is it in the first place? i'd like it to be as close to 0 as possible

 

www.onetongarage.com
has the best camber shims on the market.
it has the toe as close to 0 as u can get it.
it was even tested on the american spec vechicle
to do the design

 

there is a sticky on this about 5 posts up
might try looking there

https://www.scionlife.com/forums/viewtopic.php?t=79057