What do you guys think? xA- Rota Torques [Test chop!]
Thread Starter
Joined: Apr 2006
Posts: 3,976
From: Southeast PA

From:

Also inched out the rear wheel a tad. I have OTG spacers on the way.
15" Rota Torques. 40 offset.
Other choice right now would be the 16" Rota Subzeros, unless someone has a better suggestion.

Also found the Black Racing Pro N1:
_angle_zoom.jpg)
Anything good/bad about black racing wheels?
Oh I like it!
BTW, the Torques are gunmetal and not black. The Black Racing Pro-N1 were my second choice but not the bronze ones, I wanted to get them in black. I think the black ones come in +44 offset which would still work but you'd have to get a 5mm spacer for the front and back (along with the OTG rear spacers).
BTW, the Torques are gunmetal and not black. The Black Racing Pro-N1 were my second choice but not the bronze ones, I wanted to get them in black. I think the black ones come in +44 offset which would still work but you'd have to get a 5mm spacer for the front and back (along with the OTG rear spacers).
I say go with the Black Racing wheels. If you like those, you should check out www.discounttiredirect.com and take a look at the MB Motorsport Weapons. I think they still come in 4x100 (their Web site is down at the moment). These wheels are actually A-tech Erasers. They're available in gunmetal and in bronze. I had these on my 1998 Honda Prelude, and currently have a set of 16" MB Motorsport Competitions (A-tech Finalspeeds).
http://www.wheelsbymbmotoring.com/mbWeapon.php
http://www.wheelsbymbmotoring.com/mbWeapon.php
Thread Starter
Joined: Apr 2006
Posts: 3,976
From: Southeast PA
Originally Posted by THE_DON
I'd go with Rota Subzeros in 16"
-THE DON
-THE DON
Though, I wouldn't mind going with a little more offset, like a +38 or +35. All of the Rota wheels only come in a +40.
The Black Racing Pro N1's come in a +38 in a 4x100 and 16x7 in bronze, so I miiiight go that way.
Thread Starter
Joined: Apr 2006
Posts: 3,976
From: Southeast PA
I do dig the wheels on yours quite a bit... I don't think I can stick with 15" though.
Though, now that I've seen Phantomxa's xA, I'm definitely going with the 16" Subzeros.
Though, now that I've seen Phantomxa's xA, I'm definitely going with the 16" Subzeros.
Thread
Thread Starter
Forum
Replies
Last Post
DjFrOsT
Scion xA/xB 1st-Gen Drivetrain & Power
7
Dec 13, 2003 04:18 AM
DjFrOsT
Scion xA/xB 1st-Gen Suspension & Handling
4
Nov 6, 2003 04:54 AM









