Any interest in 1/2 inch rear hub spacers?
Thread Starter
Member
SL Member
Joined: Jul 2004
Posts: 74
From: Florida
Any interest in 1/2 inch rear hub spacers?
I work at a machine shop and I made 1/2 inch hub spacers, not wheel spacers. for the XB.
These are the kind that go between the rear arm and the hub.
they are made out of 1/2" thick 6061 T-6 aluminum.
I will also include grade 8 bolts to replace the factory ones.
i am thinkin in selling them for $55 shipping included.
Any takers?
These are the kind that go between the rear arm and the hub.
they are made out of 1/2" thick 6061 T-6 aluminum.
I will also include grade 8 bolts to replace the factory ones.
i am thinkin in selling them for $55 shipping included.
Any takers?
Senior Member
SL Member
Joined: Feb 2004
Posts: 950
From: You couldn't afford it.
I'm assuming yours is more or less just like Van's at One Ton? (which is $65 w/shipping - and flawless I might add)
Is yours a true 1/2" or 10mm (which is 3/8")?
Detailed instructions for those non-mechanically inclined folks who keep insisting on working on their own cars?
What's the outside shape? round? square? trapazoidal that matches the hub shape? (like One Ton's)
GIVE DETAILS! LOTS!
--- hub spacers involve modifying the most critical safety area on your vehicle.
Is yours a true 1/2" or 10mm (which is 3/8")?
Detailed instructions for those non-mechanically inclined folks who keep insisting on working on their own cars?
What's the outside shape? round? square? trapazoidal that matches the hub shape? (like One Ton's)
GIVE DETAILS! LOTS!
--- hub spacers involve modifying the most critical safety area on your vehicle.
Member
SL Member
Joined: Jul 2004
Posts: 61
Any Pics of them
Hey dude Im in Hawaii and the other guy is out of those shims. A lot of guys in Hawaii are going crazy with XBs since our dealer opened up 2 weeks ago. If oyu could show me some pics I be happy to buy them from you and get other guys here in hawaii to buy them to.
Thread Starter
Member
SL Member
Joined: Jul 2004
Posts: 74
From: Florida
If you guys have seen one ton garage spacers, then you pretty much have seen the ones I make. the difference is the width. Mine are made out of 1/2" thick aluminum (12.5mm)
I already installed the first set I made on my XB and I want to make sure that there are no problems with 1/2" spacing before I start selling them.
No modification needed, you don't have to cut anything, they instal in a few minutes.
Just gauging interest in the spacers at this point.
Thanks.
I already installed the first set I made on my XB and I want to make sure that there are no problems with 1/2" spacing before I start selling them.
No modification needed, you don't have to cut anything, they instal in a few minutes.
Just gauging interest in the spacers at this point.
Thanks.
Guest
Posts: n/a
you got a website? Can;t sell without a website!! 
J/K man Hey do you have a pic of it? Pics sell better, just look at ebay! Also, are there instructions on how to install them? Are they in a box or are they loose? Need the info for future refrence! :D
J/K man Hey do you have a pic of it? Pics sell better, just look at ebay! Also, are there instructions on how to install them? Are they in a box or are they loose? Need the info for future refrence! :D
Thread
Thread Starter
Forum
Replies
Last Post
Slopoke21m
Scion xA/xB 1st-Gen Suspension & Handling
54
Apr 23, 2007 12:25 AM