Hello all, after searching I still haven't found out what I needed to know for sure.
I read that with the Drag DR20's you need a spacer front and rear. What I didnt find out was if this is true on the new dr20's that came out for the xB, xa, and miata. The new ones are a 15x7.5 w/ a 38 mm offset

I already have the OTG spacer in the rear, but I am wondering about the front.

Thanks in advance.

Dustin

 

As long as the offset is under 40mm you will NOT need a spacer. Keep in mind that 38mm is the stock offset.

 

The issue that I read about was clearance of the caliper bracket. So does the 38mm offset solve this issue also?

Great info to know too btw, thank you

Dustin

 

A +38 will be no problem at all. It's when you start getting into 42, and up that you'll start to have a problem.

 

I belive that some 06.5 xB's had a problem with clearing the calipers.

B-

 

Plz help me out here, the rims im wanting to get have an offset of 42. Yall are saying you run into problems with 42. What kind of problem are you talking about?