Pulley Install (NST, Underdrive Crank)
#42
Originally Posted by alenehan
nice DIY
http://www.nonstoptuning.com/pKitToySciXD.html
EDIT: You must have edited your posted before I quoted you..
#46
Originally Posted by alenehan
Originally Posted by NonStopTuning
Anyone else? We still have a few pulleys in stock for anyone who may be interested.
Specs, prices, availability, etc...
http://www.nonstoptuning.com/NSTPULL...tToySciXD.html
Please feel free to contact us by phone should you have any questions. Otherwise, please place your order with us on our website and we would be more than happy to ship a package out to you.
Last edited by NonStopTuning; 02-22-2012 at 02:30 AM.
#48
Changed Mine Saturday
I did my replacement on Saturday. Took the plastic cover way down and did not need to remove it to complete the task. I got the Pulley Bolt off using an electric impact tool. Was a breeze. The pulley removal from the shaft required a damper pulley puller ($18 from Napa) to remove it but that, too was easy. The clearance in the fenderwell was JUST ENOUGH to use the puller to remove the pulley. The engine had to be turned to allow the puller to clear. It was EASILY turned by hand to set the shaft angle to facilitate the removal. All the rest was just plain simple.
I gained 3MPG using the cheapest gas anyone can find. I truly have the CHEAPEST gas anywhere. I can't explain, so just take my word. You should have better results.
I gained 3MPG using the cheapest gas anyone can find. I truly have the CHEAPEST gas anywhere. I can't explain, so just take my word. You should have better results.
#49
I did my replacement on Saturday. Took the plastic cover way down and did not need to remove it to complete the task. I got the Pulley Bolt off using an electric impact tool. Was a breeze. The pulley removal from the shaft required a damper pulley puller ($18 from Napa) to remove it but that, too was easy. The clearance in the fenderwell was JUST ENOUGH to use the puller to remove the pulley. The engine had to be turned to allow the puller to clear. It was EASILY turned by hand to set the shaft angle to facilitate the removal. All the rest was just plain simple.
I gained 3MPG using the cheapest gas anyone can find. I truly have the CHEAPEST gas anywhere. I can't explain, so just take my word. You should have better results.
I gained 3MPG using the cheapest gas anyone can find. I truly have the CHEAPEST gas anywhere. I can't explain, so just take my word. You should have better results.
We have only a few of these pieces in stock now, and once they are gone this item may not be available again for some time.
#50
UPDATE!
We are down to only ONE piece remaining in inventory now. It may be a LONG time before we offer these pulleys again after this one piece is sold.
So anyone who may be interested in a NonStopTuning Crank Pulley for their Scion xD may want to hurry!!!
:?
We are down to only ONE piece remaining in inventory now. It may be a LONG time before we offer these pulleys again after this one piece is sold.
So anyone who may be interested in a NonStopTuning Crank Pulley for their Scion xD may want to hurry!!!
:?
#52
NST offers more pulleys for the line of Scion cars, than all of the competition combined.
The NST Scion xD crank pulley is in stock and ready for shipping:
http://www.nonstoptuning.com/NSTPULL...tToySciXD.html
MIKE @ NST
The NST Scion xD crank pulley is in stock and ready for shipping:
http://www.nonstoptuning.com/NSTPULL...tToySciXD.html
MIKE @ NST
#54
We do have a small number of pulleys in stock and ready for immediate shipping... FREE SHIPPING in the USA this month. Please hurry if interested.
Thanks again, best of luck with all your projects!
MIKE @ NST
Thread
Thread Starter
Forum
Replies
Last Post
NonStopTuning
Exclusive Sponsored Sales
4
01-20-2015 05:20 AM
TheTripleC
PPC: Vehicles
1
01-04-2015 06:46 PM
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
12-02-2003 04:53 PM