how do you tell they are 8000k H4/9003

 

Easy man, does it look like this?



If you just have the HID bulb, then you don't have high beams.

 

they look like the ones in the picture so what do i need

 

You just need the H4 wire harness. The H4 wire harness will come ready for you to plug and play it into your vehicle and I will include the plug for you to power your high beams as well.

For reference, check out my write up below. I'll prep the harness before sending it out but you should check out the write up to see how it will work.

www.mobilehid.com/h4.htm

Thanks.

Clifford

 

Clifford,

I want to order up a kit for my 2008 XB, which kit will give me the "bluish" headlights?

Thanks!

 

Birdy- you'll want the H11 8k kit.

Thanks!

Clifford

 

ill take the H4 wire harness how do you want payment, and can you send instructions or do i just use the link. so the wiring harness is put threw the cars three prong wiring plug am i right thank you.

 

FARR - you can purchase the wire harness here:

http://www.mobilehid.com/scionlife.htm

And yes, the wiring harness is put through the three prong wiring plug.

 

so i do have to cut the wires on the bulb for the wiring harness

 

paypal has been sent

 

Cliff, when can I expect my hids? Maybe tommorow?

 

Yeah- you should have received it today but it sucks man, today is a holiday.

 

*awaits someone to post the requested video*

 

Maria - if you just want to see what the light differences are I can do a video and show off an h4 bulb when it's connected to my test bench but I don't have any H4 housings to show you the real world application output.

 

how long do you think it will take for me to get my order thank you.

 

you'll probably have it in 2 days man.

 

I got my kit today and put them in, they look great!! I got the 8k kit and the install only took about 25 minutes. The light output is amazing compared to stock IMO. I highly recommend Cliff if your thinking about getting a set of hids. Shipping only took 3 days and that includes the holiday! I will try and get some pics up t/m. Thanks again Cliff.

 

glad you like the kit man.

all pm's have been replied and all kits/wire harnesses have shipped.

Thanks!

c.

 

hey, could you please give me some info on your 9006 wiring harness. specifically the GA of wiring used and brand of fuse.
thank you.

 

Great question.

The main power wire from the battery is a 14 gauge wire rated at max of 32 amps. The fuse wired inline though is a 20 amp fuse so the max capacity of the power wire should never be reached. I'm not sure what brand the fuse is but I can't imagine much variance between one brand or another.

Also, the wires to the ballasts is 18 gauge and each ballast gets a dedicated ground.

Thanks.

Clifford