We are now offering plenty of 2AZ valve options for those looking for a more rugged valve over stock for your build cylinder head. We have numerous bores from standard, to +.5mm and +1mm overbore.

You can chose from Stainless, Black Nitrided or Inconel!!!

http://www.dezod.com/cat-valves.cfm

Note the REV valves are used in Kenny Tran's drag car and are VERY affordable for a set of 8.

 

prices?

 

All of the REV valves, regardless of size (std, +.5mm or +1mm) are $144 for a set of 8. That's $288 to do your entire head in stainless valves!!!

SuperTech Nitrided (std or +1mm) are $196 for 8. That's $392 to do your entire head in comparison.

Don't forget Inconel exhausts will run you more $$ in the SuperTech line as well.


All valves can be viewed here Marcello:
http://www.dezod.com/cat-valves.cfm

Also, note, you are in South Florida, which means order any REV valves and you will have them the next day because REV is in West Palm Beach!!!

 

TTT

 

Do y'all have the BC spring kit?

 

Yes we have their single wound spring kit!

http://www.dezod.com/pd-brian-crower...-kit-2azfe.cfm

 

TTT

 

so I install these valves on a stock head?? no other thing needs to be done to the head?

 

You would need to clean the head, lap the seats and reset the valve lash clearance.

 

BUMP!

 

TTT

 

TGIF!

 

TTT

 

i just got my spare cylinder head, doing some inspection right now then my shop list for headwork!

 

Get it to us ACE!