Kicker 12" L7 's
Thread Starter
Senior Member
SL Member
Joined: Apr 2007
Posts: 103
From: T-ville, Fl
Kicker 12" L7 's
I have for sale 2 Kicker Solo-Baric L7's 12" subs. They are the 2006 model with 2 ohm dvc ( 06S12L72 ).
Looking to get around $250+s&h for the pair. Still open to offers.
Also if local, I will throw in the box I made for them in for free.
2.5 Cu.Ft. net each chamber, tunned to about 35hz, retain spare tire use
Kickers owners manual:
http://www.kicker.com/sites/default/...aricL72006.pdf
Model: 06S12L72
Nominal Impedance(Ohms): D2
SPL dB 1W/1M: 88.6
Displacement, cc: 2475
Displacement, cu.in.: 151
Hole cutout, in dia: 11 3/16
Mounting Depth, in.: 6 11/16
Revc: 3.73
VC Inductance, mH: 3.81
Sd, m3: 0.0645
BL: 17.93
Vas, Liters: 65.55
Vas, CuFt: 2.31
Moving Mass , oz.: 6.97
Fs: 33.1
Qms: 6.191
Qes: 0.503
Qts: 0.465
Peak Power Handling, watts: 1500
EXmax, mm: 14.1
Looking to get around $250+s&h for the pair. Still open to offers.
Also if local, I will throw in the box I made for them in for free.
2.5 Cu.Ft. net each chamber, tunned to about 35hz, retain spare tire use
Kickers owners manual:
http://www.kicker.com/sites/default/...aricL72006.pdf
Model: 06S12L72
Nominal Impedance(Ohms): D2
SPL dB 1W/1M: 88.6
Displacement, cc: 2475
Displacement, cu.in.: 151
Hole cutout, in dia: 11 3/16
Mounting Depth, in.: 6 11/16
Revc: 3.73
VC Inductance, mH: 3.81
Sd, m3: 0.0645
BL: 17.93
Vas, Liters: 65.55
Vas, CuFt: 2.31
Moving Mass , oz.: 6.97
Fs: 33.1
Qms: 6.191
Qes: 0.503
Qts: 0.465
Peak Power Handling, watts: 1500
EXmax, mm: 14.1
, thats why i'm trying to sell the kickers.
Thread Starter
Senior Member
SL Member
Joined: Apr 2007
Posts: 103
From: T-ville, Fl
I have 2 12" ssd's running off an mmats d2100.2, 1550 watts rms @ 2ohms. I am currently at the bondo stage on the new fiberglass boxes, they're louuddd, but the box is still unfinished :/ and this cold wether isnt helping any haha
Thread Starter
Senior Member
SL Member
Joined: Apr 2007
Posts: 103
From: T-ville, Fl
the boxes are funcional, i've had the subs in the last few months, i am working on finishing them now over the break (not going to happen though 
).
The new box for each sub is about 2 cu ft net, tunned to 32hz, with port opening of about 24 sq in. (3 3" thin wall pvc pipe). Yeah the port area is a little on the small side, but they're round ports, and winisd said the port velocity was in the ok range. But even with a smaller box, the new FI's>Kicker's. They do pound, anything louder and I would be afraid to hurt the car, it flexes in places it shouldn't haha. I had the kicker setup metered once and they got a legit 144dB (term lab on the windshield) and I know for sure that the FI's are louder.
).The new box for each sub is about 2 cu ft net, tunned to 32hz, with port opening of about 24 sq in. (3 3" thin wall pvc pipe). Yeah the port area is a little on the small side, but they're round ports, and winisd said the port velocity was in the ok range. But even with a smaller box, the new FI's>Kicker's. They do pound, anything louder and I would be afraid to hurt the car, it flexes in places it shouldn't haha. I had the kicker setup metered once and they got a legit 144dB (term lab on the windshield) and I know for sure that the FI's are louder.
Senior Member
SL Member
Joined: Apr 2008
Posts: 4,156
From: Orlando, FL
the boxes are funcional, i've had the subs in the last few months, i am working on finishing them now over the break (not going to happen though ).
The new box for each sub is about 2 cu ft net, tunned to 32hz, with port opening of about 24 sq in. (3 3" thin wall pvc pipe). Yeah the port area is a little on the small side, but they're round ports, and winisd said the port velocity was in the ok range. But even with a smaller box, the new FI's>Kicker's. They do pound, anything louder and I would be afraid to hurt the car, it flexes in places it shouldn't haha. I had the kicker setup metered once and they got a legit 144dB (term lab on the windshield) and I know for sure that the FI's are louder.
).The new box for each sub is about 2 cu ft net, tunned to 32hz, with port opening of about 24 sq in. (3 3" thin wall pvc pipe). Yeah the port area is a little on the small side, but they're round ports, and winisd said the port velocity was in the ok range. But even with a smaller box, the new FI's>Kicker's. They do pound, anything louder and I would be afraid to hurt the car, it flexes in places it shouldn't haha. I had the kicker setup metered once and they got a legit 144dB (term lab on the windshield) and I know for sure that the FI's are louder.
Nice.. Yea im not a fan of kicker at all. I was thinking of getting the l7 for my truck just because they were cheap..but its a very sloppy sub.. no matter what box.. Im sure right now you already know this.. Expecially with the FI's. My fav setup ive head was my Elemental design dual A12v2 setup with 2 JBl1200.1's in a ported box 2 cubes per sub ported to 30hz.
It would make ur gut jiggle!
I always wanted to try a crx style box in the tc.. Firing the subs up yeilds more db. But firing back got much better sq.
What source unit are you using? I have the eclipse cd5000.
Last edited by ElevationTC; Mar 27, 2010 at 02:44 AM.
Thread Starter
Senior Member
SL Member
Joined: Apr 2007
Posts: 103
From: T-ville, Fl
Thats exactly why i changed to FI, for better sq, everyone knows kickers get loud but have poor sq, I wanted a better sq setup that can still get loud thats why I went with med size boxes and the copper coil option on the subs.
Right now I have a pioneer 7800 head unit its a great single din unit, but looking to get the new Avic x910 in the near future for gps, dvd and all that other good stuff.
That ed setup sounds like it would pund and def. make your gut jiggle haha, with the kickers people would always complain about how it feels when they breathe and how they could fell their hair move
Right now I have a pioneer 7800 head unit its a great single din unit, but looking to get the new Avic x910 in the near future for gps, dvd and all that other good stuff.
That ed setup sounds like it would pund and def. make your gut jiggle haha, with the kickers people would always complain about how it feels when they breathe and how they could fell their hair move
The 10" L7 in the truck box I use sounds perfect but I agree with the big bass setups with large cubic feet boxes on Kickers. They get sloppy. Elevation frowned when I showed up with all Kicker audio (components x 4, mono, 4 chan, L7) to his shop until he heard it. He was surprised but I've got a few little tweaks done with the Pioneer deck, amp tuning and some frequency blockers on the tweets to take down their brightness.
Thread
Thread Starter
Forum
Replies
Last Post
sehall6h
Scion xD ICE & Interior
2
Feb 21, 2016 04:28 PM
lex990
Scion xA/xB 1st-Gen ICE & Interior
14
Apr 18, 2005 11:44 PM
Gunnett
Scion xA/xB 1st-Gen ICE & Interior
9
Mar 31, 2005 02:57 AM
