1UP CREW DISCUSSION / SCION MEET
I deter my previous statement, well slightly.
Aluminum gaskets suck *****.
So the real battle is between:
Stainless Steel Gaskets vs. Copper Gaskets
Some cars love copper and others like stainless steel.
Since my history with copper gaskets is terrible!!!!!!!
I just ordered a 2nd gasket, but this one is a stainless steel version.
I'll just have to wait longer I guess. The copper should be here this week, steel next week.
I'm praying
that the flanges on the turbo and exhaust manifold aren't warped. They are pretty thick so I don't think thats the case. If they are i'll have to get them machined >.< !!!!
Since i'm gonna be doing all this working I might as well make it a big job.
1. Remove Exhaust Manifold/turbo/Downpipe/S-Pipe
2. Clean Engine Bay
3. Use Exhaust Wrap on all Removed Parts.
4. Spray Hi-Temp Silicone on all Exhaust Wrap
5. Time to bust out my dremel and port a few things (gotta be careful with the metal shavings
)
6. Reinstall everything and use new exhaust gaskets (I was missing 2 lol),
7. Install new stainless steel turbo/manifold gasket.
8. Use Copper Anti-Seize on bolts/nuts
7. New Header/Exhaust Manifold Gasket.
8. Hopefully no leak when I turn on the car.
9. Retune Hydra
10. Retweak Boost Controller
11. Finally beat Geo
12. Dynotune so I can finally get all the cells on the fuel/ignition map
13. Cry cause its finally working
14. Beat Geo by 10 car lengths
Aluminum gaskets suck *****.
So the real battle is between:
Stainless Steel Gaskets vs. Copper Gaskets
Some cars love copper and others like stainless steel.
Since my history with copper gaskets is terrible!!!!!!!
I just ordered a 2nd gasket, but this one is a stainless steel version.
I'll just have to wait longer I guess. The copper should be here this week, steel next week.
I'm praying
Since i'm gonna be doing all this working I might as well make it a big job.
1. Remove Exhaust Manifold/turbo/Downpipe/S-Pipe
2. Clean Engine Bay
3. Use Exhaust Wrap on all Removed Parts.
4. Spray Hi-Temp Silicone on all Exhaust Wrap
5. Time to bust out my dremel and port a few things (gotta be careful with the metal shavings
6. Reinstall everything and use new exhaust gaskets (I was missing 2 lol),
7. Install new stainless steel turbo/manifold gasket.
8. Use Copper Anti-Seize on bolts/nuts
7. New Header/Exhaust Manifold Gasket.
8. Hopefully no leak when I turn on the car.
9. Retune Hydra
10. Retweak Boost Controller
11. Finally beat Geo
12. Dynotune so I can finally get all the cells on the fuel/ignition map
13. Cry cause its finally working
14. Beat Geo by 10 car lengths
Just put a couple more stickers and you'll be set
orrr.....if you wanna go crazy..you could always get a NASA Wing. Maaan your car will FLY.
Then again..this is the cheap route.
orrr.....if you wanna go crazy..you could always get a NASA Wing. Maaan your car will FLY.
Then again..this is the cheap route.
Originally Posted by TCpete
Originally Posted by BADS33D
Originally Posted by Crippie
ive been sending Joel Pms tring to get intouch with em to confirm for this saturday, but no answers... hopefully hes alright... and im hoping to get intouch with him soon.. if not.. might have to find another avenue for the install... trying to avoid that.
As for bbq... probably not till sometime next year.... too much stuff going on being the holidays and all
As for bbq... probably not till sometime next year.... too much stuff going on being the holidays and all
YES YOU DO!!.. lol denny if you wana do it.. im down... i got a super good friend who can help do the clutch install with us... he might charge the same or less then joel ..but he is one of few i trust with a car... LMK and ill ask him how much he would charge...
But ill let you know. If by January nothings happened, 1uP Garage will seriously be a consideration. I trust my peeps.
Originally Posted by SCIONFALCON
HEY IS ANYONE INVITED TO YOUR MEET?
i have a 04 xb i would like to check out some other cars.
i have a 04 xb i would like to check out some other cars.
denny//^^ i understand haha... i would be the same way... actually.. if you feed him he'll probably do it for free lol... its either food or money... if you buy him some cheeseburgers and fries beleive me he'll do it... ill talk to him and see if he's up for it...
So I left work early today, because no one was there. I decided to check out the leak more thoroughly. To my f**king surprise. Guess what I found. Honestly I couldn't believe it could happen. Since it was technically a new part. I'll post a picture in a few. Its really hard to believe, lol.
Needless to say, it no wonder it affected boost tremendously.
Yea Geo, you might want to think about getting at least 300whp worth of stickers
or at least some special tcPete ajiaco sauce injected into the your engine.
j.k. =)
Needless to say, it no wonder it affected boost tremendously.
Yea Geo, you might want to think about getting at least 300whp worth of stickers
j.k. =)







