Looking for a place to make a new DP and back full exhaust, anyone know of a solid place that wont b to expensive?

 

i would tell you a couple of places but im afraid you would drag their good names through the mud just like every other shop that you have gone to. your best bet if you wanna save some money on it is to fab it yourself. you could probably find a decent mig welder used on craigslist for cheap. then all you would need are some basic tools like jackstands and a hacksaw plus some raw materials. there are plenty of free resources out there on how to weld. just practice on some scrap first, then once you get the hang of it do it yourself.

 

uhhh i dragged 2 names through the mud. velocity factor n japtrix. velocity factor didnt spec my built motor right and over charged me on everything. japtrix left me with a 10afr ratio cruising and bucking down the street. k thx.

 

you can go to Noels exhaust shop in opalocka. i got my 3" exhaust there for 185. its crushed bent though. the s pipe was the only thing crushed bent. but for 185 cant go wrong. all i provided was my muffler and tip.