Hello everyone,

I am having a small problem that I can't figure out... when my HID's are on they are fine but SOMETIMES when I turn my lights on, only ONE of them turn on...I have to keep turning them on and off and on and off until they both come on...=( does anyone know what the problem could be or if this is fixable?

thanks in advance for all the help!

 

Sounds like the problem is your ballast. Try switching them and see if the problem happenst to other bulb.

 

cool, thanks for the advice...i'll try that to see if the problem still persists.

 

be sure to also check the contacts on the HIDs and BALLAST

 

I have the same fcken problem....i think im just gonna go buy new H.I.D.s now...i took the ignitor apart but its all sealed, my connections are clean and i even bent them slightly to make sure they are making a connection.

 

Yeah, I was thinking about that too. all my connections are good. I think it's just the igniting problem too...=/ I just hate going back to regular bulbs..I got so used to having HID's...lol

 

if any of you have harnesses so that the ballasts are powered directly by the battery, check those as well as any relays that they use.

 

i have that type of kit...but what do u mean by checking those? and what do I look for when looking at he relays?

 

if the HIDs are powered directly by the battery and not by the factory harness, then check the relays for rust or corrosion, and check for any damage in the wires (any exposed wire from the sheathing)