So yeah i bought projectors and i'm stuck!!! i plug all the wires in and there is only 1 plug left. Its for the angel eyes.

here are the pics.
the clip



stock clip





the last pic is from jlevi website. that is the white piece. is that black piece he got suppose to come w/ projectors? i don't have that piece

 

theres another part to that... idk if that helps lol. but im tired and on my 25th cig of the day and idk whats goin on but um... if you ocnnect the stock headlight back up. there is the parking light connecter that that should just plug in

 

.., yes i know, that white part its the stock connector i unplugged from the stock headlights. these aftermarket projectors have that clear clip. the picture in jlevi shows a black clip that plugs into that part... i am wondering if that is suppose to come w/ the projectors or not.

 

idk i dont have the projectors.... sorry.

 

The white connector looks like the turn signal connector. The black clip is the plug for the parking lights that you need to plug that into. At least that from what i can tell. Sorry Can't be of more help.

 

YO ok heres the deal bro

i just installed those
u have to take the peice from ur stock wiring that is for ur parking lights and use that.. the bulb like plug goes into the the spot on the harness were ur normally plug in the 194 bulb!

any questioins holla at me on aim

 

ok i got it... so there is 1 cable unused just dangling... i'm going to tape it up.

 

yup

 

take the 2 whites and 2 blacks.. spin the 2 whites together and the 2 blacks together and then use a cable splice to cut into your parking lights.. you can buy them in like 4 packs at wal-mart for like 5 bucks..

 

u dont need to splice anything and if u did. u installed wrong buddy

 

those projector lights, have 2 white cables and 2 black cables for the 2 small blueish lights, and the 2 angel eyes around the lights themselves... where do you suggest those wires attach to then?

where do you suggest they go if you dont, 1. have a switch to turn them off or on.. or 2. want to control them independently of the headlights..


I didnt install them wrong.. I installed them exactly how I wanted them to work.

I have mine spliced into my parking lights, so that when they are on..they look like this

 

i have mine pluggd into my parking lights. nO splicing

working hte SAME exact way

but if u want an independent switch u will have to wire it custom

 

yours had plugs on the end?

here is the splice I am talking about, I used those to attach into my parking lights..

 

mine had plugs

and if ur guna wire.. dont splice like that.. use male and female connectors so u can undo what u do

 

I can undo.. those little metal pieces cut into the wire but it's the tinest cut and the metal just barely touches the parking light wire.. after I remove it the wrap around the wire can just be pinched back close..

 

we didn't have to splice anything. are projectors are different then yours

 

looks like it's a little bit different mold.. but the same 2 black and 2 white wires are there.. mine just didnt have any connectors on the end heh..

 

yeah like he said buddy