license place relocation
anyone know where i can get a kit for this for my tc? or.. perhaps a cheaper way of doing this?
i searched.. came up with nothing great...
lemme know!
i searched.. came up with nothing great...
lemme know!
Senior Member




Scion Justice League of America
SL Member
Joined: Apr 2005
Posts: 5,594
From: Portland, Oregon
Long bolts, a few nuts and large washers and you can relocated the plate down to the bottom grill for cheap and have the front bumper holes filled....
That's your cheapest option... washer on the front and back of the grill with a long bolt in which you mount your plate.
That's your cheapest option... washer on the front and back of the grill with a long bolt in which you mount your plate.
Originally Posted by WeDriveScions
Long bolts, a few nuts and large washers and you can relocated the plate down to the bottom grill for cheap and have the front bumper holes filled....
That's your cheapest option... washer on the front and back of the grill with a long bolt in which you mount your plate.
That's your cheapest option... washer on the front and back of the grill with a long bolt in which you mount your plate.





i actually left it in the same place as stock but just not drilled into my bumper!!! Thanks to the peeps at RedMcCombs Scion in San Antonio!!!
I don't even know how bored a cop would be to pull someone over without a front license plate. I go to school where there is at least 15 cops patroling contantly, and I see MANY cars without their front license plate. I doubt they get pulled over, cause if so, my smoked license cover is just as bad... so should I just take off my license?
Originally Posted by Drei
was looking at that mounting kit from the eight08customs.com, how would that work on the RS2.0 grill since its not the same as the normal tCs? will it scratch the steel or what not?
Thread
Thread Starter
Forum
Replies
Last Post
danaxb
Scion xB 2nd-Gen Owners Lounge
1
Aug 10, 2015 06:33 PM
mikeytomas
Scion xB 2nd-Gen Drivetrain & Power
1
Aug 6, 2015 08:54 PM








