MobileHID in ANZO headlights(modded cutoff)[UPDATE PG2!!!!!]
Thread Starter
Senior Member
SL Member
Joined: Oct 2006
Posts: 1,070
From: San Jose, CA
no way can the first picture be aftermarket.
The hotspots are actually aimed downwards a bit. I aimed my lights with information from HIDplanet. Theyre actually really helpful over there.
I even drove my friends supra that was dumped (1 inch tucked) infront of my tc (which my friend was driving) It doesnt even look like theyre shining.
However, they do glare over bumps, but thats a given.
Also, I already know these are not even close to par for HID projectors. Im planning to retrofit these with some d2s projectors, maybe e46 or something
The hotspots are actually aimed downwards a bit. I aimed my lights with information from HIDplanet. Theyre actually really helpful over there.
I even drove my friends supra that was dumped (1 inch tucked) infront of my tc (which my friend was driving) It doesnt even look like theyre shining.
However, they do glare over bumps, but thats a given.
Also, I already know these are not even close to par for HID projectors. Im planning to retrofit these with some d2s projectors, maybe e46 or something
Senior Member
SL Member
Joined: Oct 2007
Posts: 291
From: Jamaica, NY
Yes way.
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
TSX vs Aftermarket
Shields:
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
TSX vs Aftermarket
Shields:
Senior Member
SL Member
Joined: Sep 2006
Posts: 249
From: Henderson
I bought some cheap ebay projectors and the cutoff is really low. I guess thats what i get for buying ebay lights. Anyhoo... I'm wondering if I bake these lights open, can I actually shave the cutoff so the lights are higher? The passenger front lookes like someone was trying to draw a straight line with it and then someone came up behind him and scared him and it goes practically to the sky. The drivers, on the other hand, is so low It only extends about 6 feet infront of my car and theres the cutoff. haha. Correct me if im wrong but i believe that the lense inverts the light from the top to the bottom, so inside the light comes over top of the cut off, but when it comes out of the lense it comes out the bottom right?
Senior Member
SL Member
Joined: Oct 2007
Posts: 291
From: Jamaica, NY
Originally Posted by 07_Tc_blacksandpearl
I bought some cheap ebay projectors and the cutoff is really low. I guess thats what i get for buying ebay lights. Anyhoo... I'm wondering if I bake these lights open, can I actually shave the cutoff so the lights are higher? The passenger front lookes like someone was trying to draw a straight line with it and then someone came up behind him and scared him and it goes practically to the sky. The drivers, on the other hand, is so low It only extends about 6 feet infront of my car and theres the cutoff. haha. Correct me if im wrong but i believe that the lense inverts the light from the top to the bottom, so inside the light comes over top of the cut off, but when it comes out of the lense it comes out the bottom right?
Senior Member
SL Member
Joined: Jun 2006
Posts: 7,862
From: Lurking Inside Your Garage!
Originally Posted by striker_1818
Yes way.
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
HID bulb???....Since I am running HID's in my stock non-projecter housing.
Do u have anything u can possibly sell me for like "cheap"??????....
Mucho Gracias!
Senior Member
SL Member
Joined: Oct 2007
Posts: 291
From: Jamaica, NY
Originally Posted by TeeCizzle
Originally Posted by striker_1818
Yes way.
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
HID bulb???....Since I am running HID's in my stock non-projecter housing.
Do u have anything u can possibly sell me for like "cheap"??????....
Mucho Gracias!
I can only get you a pair of 85122+ philips D2S bulbs for 20 bucks.
Again, true projector retrofit means the bulb will be D2S.
Rebased bulbs mean the D2S bulbs were hacked up to fit different applications. You need to have the D2S base intact otherwise, optics will be off and you will have a crazy cutoff.
Senior Member
SL Member
Joined: Jun 2006
Posts: 7,862
From: Lurking Inside Your Garage!
Originally Posted by striker_1818
Originally Posted by TeeCizzle
Originally Posted by striker_1818
Yes way.
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
Anzo projectors with a custom aluminum shield i made at my school lab.
As you can see, the right projector is tilted to the right. That's because the stupid aftermarket headlight didn't aim them correctly from the factory.
It is pretty easy to mod any projector if you know how:
Here is the difference in bowls:
From left to right: FX35, TSX and aftermarket
HID bulb???....Since I am running HID's in my stock non-projecter housing.
Do u have anything u can possibly sell me for like "cheap"??????....
Mucho Gracias!
I can only get you a pair of 85122+ philips D2S bulbs for 20 bucks.
Again, true projector retrofit means the bulb will be D2S.
Rebased bulbs mean the D2S bulbs were hacked up to fit different applications. You need to have the D2S base intact otherwise, optics will be off and you will have a crazy cutoff.
What is the D2S?.....lol
Can I still use my 9006 bulbs??...or do I have to get a different bulb??
Thread
Thread Starter
Forum
Replies
Last Post
TheTripleC
PPC: Vehicles
1
Jan 4, 2015 06:46 PM
minter66
PPC: Vehicles
0
Dec 15, 2014 01:45 PM
Risen_Son_Racing
Scion tC 1G Owners Lounge
13
Mar 14, 2008 09:59 PM
