Just bought a tranny for 300 with 30,907 k and it begins

 

You dont need the cv axles - im still using my auto ones - no issues. Also the motor mounts arent that expensive to buy directly from Toyota - one is like $40 and the other $30 - thats how I bought mine. Oh and im still using an auto harness and ecu

 

I thought the driver side CV joint/axles was a tad different? If the mounts arent that expensive ill just buy them new from Toyota. Reason why i want to get the manual wiring harness is because it would be a lot easier and i don't have to do any bypassing. The Manual ECU yes i seen some on Ebay but there a little pricey. I haven't had a chance to go to a junk yard but i think i can pick one up for like 40bucks or 60. I just need to get my lazy **** to the junk yard in the AM before work.

 

Nice i picked up mine for 350 think it was 30k as well.

 

I paid $175 plus $75 shipping for a 08 tranny with 20k Some place in Pennsylvania has a TON of tc motors and trannys and lets them go cheap

 

pm there info so i can pick up stuff from them later down the line.

 

The place I bought it from has an 05 ecu and engine harness so im trying to make a deal plus this was very close for me. I plan On buying anything under 50 bucks from the dealership. I think im going to just do a Fidanza flywheel and TRD or exedy clutch.

 

Hey if you can see if they have an extra harness call me up and tell me for how much. Ill pm my number to you.

 

well i know this place just got this car in so they'll only have one but idk how much they want theyre kinda a ripoff but if i dont get it ill let u know

 

yeah that would be dope the harness is hard to find.

 

Bump.... Update where everyone swap its at...

i need Manual ENGINE Wiring harness, Driver side CV joint, Manual Trans Mounts Front & Back.

But Im somewhat at a halt family ish.

 

Just minor questions when I start is there already spots to install the clutch pedal in and brake? I'm just guessing there is somewhere on the frame because I worked on a twin turbo swap with my buddy on a 300zx and the n/a and tt frame were super identical.

 

no there is no pre-hole. From what I've read you need to drill the whole through the fire wall

 

I believe the template should already be etched on the firewall..you have to drill it yourself but it should already pretty much be laid out for you.

 

Ya I messed up when I did it I acually didnt put the pedal up high enough and I ended up bolting it to the Firewall itself I would say thats the most PITA job to do. I ended up taking my car to Ptuning as soon as I got done and they were the ones that told me that it was wrong. I ended up paying for them to fix it which was ok by me becuase I didnt really want to mess with it anymore

 

hey everyone something came my way and the deal was something i couldnt refuse so my parts are for sale if anyone is interested here is the link
https://www.scionlife.com/forums/sho...85#post3758285
check out the thread

 

anyone know if there is a difference in the 05 ecus beside manual and auto??? im trying to buy one now its a 2005 but is there like an early and a later version.... i have a rs1 tc if that helps.

I see like 04/05 and 05/06

I guess really what part number am I looking for

 

Anyone looking for a manual transmission hit me up , I'm selling a brand new one for $450.

 

Manual Tranny e350- (300) Mileage: 30,907
Axle Assy Left (45.99) Mileage 33k
Clutch/Brake Pedal (34.99) Mileage 33k
Shifter/Shift Linkage (34.99) Mileage 33k
Center Console (39.99) Mileage N/A
Master Cylinder, Slave Cylinder (30.99) Mileage 33k
TRD Shift **** (45.99) New
ECM/ ECU- 225.00 (59.99) Mileage 7K
Doctor Isotope: Cable and Cage Bushing Set (42) New

Just missing the gauges, engine harness and mounts. I'm going with the exedy stage II clutch, a fidanza flywheel, B&M short shifter and quaife LSD.

 

The gauges need to be changed for a swap? BTW really great prices where did you pick that stuff up at?